Installation - Chevrolet 10 Series 1968 Service Manual

ELECTRICAL—BODY AND CHASSIS 12-14
Flatface Cowl Models (Fig. 19)
1. Disconnect battery ground cable.
2. Disconnect electrical connectors and oil pressure
pipe.
3. Remove three screws attaching cluster housing to
dash panel.
4. Pull cluster from opening in dash panel.
5. To install, reverse removal procedure.
Chevy Van
1. Disconnect battery ground cable.
2. Disconnect speedometer cable at speedometer head.
3. Remove two nuts attaching cluster to dash panel.
Cluster may now be pulled clear of dash panel.
4. Disconnect all indicator and illuminating bulb sock­
ets, carefully noting their location for proper re-

installation.

Remove cluster.
5. To install, reverse removal procedure.
Tilt Cab Models (Fig. 20)
1. Disconnect battery ground cable.
2. Disengage cluster retaining clips by inserting Tool
3. From under dash, disconnect speedometer at over­
4. Disconnect wiring.
5. To install, reverse removal procedure.
INDICATOR AND ILLUMINATING
BLUB REPLACEMENT
10-60 Conventional Cab Models
1. Turn bulb holder counter-clockwise to remove from
F ig . 19-Instrument Cluster Assembly - F/F Cowl
J-7900 in provided slots as shown in Figure 20 and
remove cluster.
speed switch.
the cluster housing.
CHEVROLET TRUCK SERVICE MANUAL