Step 2: Charging The Battery Pack - Sony DCR-DVD505 Nero Express 6 Operating Manual

Step 2: Charging the battery pack

You can charge the battery after attaching the
"InfoLITHIUM" battery pack (P series)
(p.134) to your camcorder.
• You cannot use an NP-FP30 battery pack with
your camcorder. (See the reverse side of the
battery pack for the model number.)
Installing the battery pack with excess force may
lead to camcorder malfunction such as
deterioration in battery pack performance or
difficulty in removing the battery pack.
DC IN jack
DC plug
1
Slide the battery pack in the
direction of the arrow until it clicks.
POWER
switch
CHG lamp
Battery
Jack cover
AC Adaptor
Power cord
To the wall outlet
2
Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3
Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover to connect the AC
Adaptor.
4
Connect the power cord to the AC
Adaptor and the wall outlet.
The CHG (charge) lamp lights up and
charging starts.
Match the v mark on
the DC plug with v
mark on your
camcorder.
Jack cover
21