Sony DCR-DVD405 Nero Express 6 Operating Manual page 124

Warning indicators and messages (continued)
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating
environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
% (Moisture condensation warning)*
Fast flashing
• Moisture condensation has occurred
with the disc. Turn off your camcorder
and leave it for about 1 hour (p.135).
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher.
Fast flashing
• The temperature of your camcorder is
extremely high.* Turn off your
camcorder and leave it for a while in a
cool place.
(Warning indicator pertaining to
"Memory Stick Duo")
• "Memory Stick Duo" is not inserted
(p.30).
(Warning indicators pertaining to
"Memory Stick Duo")*
• The "Memory Stick Duo" is damaged.
• The "Memory Stick Duo" is not
formatted correctly (p.77, 131).
(Warning indicator pertaining to
incompatible "Memory Stick Duo")*
• An incompatible "Memory Stick Duo"
is inserted (p.131).
- (Warning indicator pertaining
to the write-protect of the "Memory
Stick Duo")*
• The write-protect tab on the "Memory
Stick Duo" is set to lock (p.131).
124
(Warning indicator pertaining to the
flash)*
Slow flashing
• Still charging.
Fast flashing
• There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient, so
camera-shake easily occurs. Use the
flash.
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the camcorder
steady with both hands and shoot the
image. However, note that the camera-
shake warning indicator does not
disappear.
* You hear a melody when the warning indicators
appear on the screen (p.80).
Description of warning
messages
If messages appear on the screen, follow the
instructions.
x Battery
Use the "InfoLITHIUM" battery pack.
(p.133)
Battery level is low. (p.21, 133)
Old Battery. Use a new one. (p.133)
x Drive
Z Drive error. Turn on power again.
• A problem may have occurred with the
disc drive. Turn off and then on again.