Bosch XDK110 General Information Manual page 52

!
6. Legal Disclaimer
XDK housing is not to be opened or tampered with. In case of XDK in a single box package a
breakout board has been provided with delivery so that the user can access the extension bus of
XDK without opening the housing.
XDK is designed for use within environmental conditions as further detailed in the technical
handbook. Any use or operation under deviating environmental conditions must be validated and
tested on customer's own responsibility.
Manufacturing of XDK or derivations, adaptations thereof may only be done by BCDS.
XDK is not intended to represent a final design recommendation for any particular application.
Final device in an application has to be designed, tested and validated as per customer's own
defined series production process (e.g. proper circuit board design and layout, heat-sink, proper
supply concept etc.) taking into account the applicable state of the art in technology.
The customer shall be responsible for conducting the design of customer's application or project
within the scope of the Internet of Things (hereinafter referred to "Customer Application") as well as
the integration of the XDK into such Customer Application and any adequate operating safeguards
taking account of the state of the art in technology and all applicable statutory regulations and
provisions. In order to avoid/minimize risks associated with a Customer Application, sufficient
validation and testing must be provided by the customer to avoid inherent or procedural hazards.
Bosch assumes no responsibility for the consequences of use of the Customer Application or for
any infringement of patents or other rights of third parties which may result from its use in
combination with any technology developed or added by the customer.
Neither the XDK nor a potential product derivation, nor the break-out board or any other XDK
component adaption are designed, intended, or authorized for use as components in systems
intended for surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Bosch product could create a situation where
personal injury or death may occur. The same applies for any kind of nuclear systems or weapons.
In the event of any use of XDK outside the BCDS expressly specified environmental or installation
conditions customer shall indemnify and hold BCDS and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use.
XDK110
© Bosch Connected Devices and Solutions GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as
copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
General Information Guide XDK110 Page ! 5 2
BCDS