Bme280: Environmental Sensor - Bosch XDK110 General Information Manual

!

2.3.5 BME280: Environmental Sensor

The BME280 is an integrated environmental sensor developed specifically for mobile applications
where size and low power consumption are key design constraints. The unit combines individual
high-linearity, high-accuracy sensors for pressure, humidity and temperature, designed for low
current consumption (3.6 µA @ 1 Hz), and long-term stability. The humidity sensor features an
extremely fast response time which supports performance requirements for emerging applications
such as context awareness, and high accuracy over a wide temperature range. The pressure
sensor is an absolute barometric pressure sensor which features exceptionally high accuracy and
resolution at very low noise. The integrated temperature sensor has been optimized for very low
noise and high resolution. It is primarily used for temperature compensation of the pressure and
humidity sensors, and can also be used for estimating ambient temperature.
Table 9: Sensor Measurement Ranges and Accuracies
Parameter
Operating Temperature Range
Operating Pressure Range
Absolute Accuracy Pressure
Absolute Accuracy Temperature
Absolute Accuracy Humidity
Average Current Consumption
(1Hz Data Refresh Rate)
XDK110
© Bosch Connected Devices and Solutions GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as
copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
General Information Guide XDK110
Condition
Operational
Full Accuracy
H, T
P, T
H, P, T
Min Max
-20 25 +60
0 +60
300 1100
±10
±2
±10
1.8
2.8
3.6
Page ! 1 5
Unit
°C
°C
hPa
hPa
K
%RH
µA
µA
µA
BCDS