Installation Inspection Record - Farmi Forest Corporation 4067 Operation, Maintenance And Spare Parts Manual

INSTALLATION INSPECTION RECORD

CRANE TYPE
SERIAL NO.
YEAR OF MANUFACTURE
Load test according to
SFS 4261
ITEM UNDER INSPECTION
1. Before installation; 3-point lift
state of lifting arm
state of pusher arm
locking of tractive resistance sensor
gaskets and cleanness of hydraulic connections
2. Before test drive
check state of machine, load and operating plates
stick minimum distance warning label e.g. to valve
connector or rear window
check sizes and locking of loader's mounting pins
check that the hydraulic hoses are connected
correctly
check that fast couplings are securely in place
check that valve shafts move smoothly
check the amount of hydraulic oil in the tractor
check valve table attachment
check shielding of hoses in the cabin and shielding
of levers
check tightness of loader fastening screws
(cf. installation manual)
3. During test drive
cylinder bleeding
determining stand stability
test use with allowable load (cf. loading table)
loader/cabin at various hoist positions
loader/cabin at various boom positions
hose friction
4. After test drive
sagging of booms, max. range 15 cm/min
check amount of oil with cylinders broken in
oil leaks; tighten joins if necessary
FARMI 4067
FARMI
date:
CHASSIS: model
make, model
performed by:
Notes
29
F = faultless R = needs repair
F R