Replacing Oven Lamps; How To Remove The Oven Doors - Bush BESAW50B Instruction Manual

Care and maintenance
Looking after your appliance
Replacing the oven lamps
Disconnect the oven from the power supply at the fuse-box by means of the switch used to connect the

appliance to the electrical mains ;or unplug the appliance (gas)
Remove the glass cover of the lamp-holder by rotating anti-clockwise

Remove the lamp and replace with a lamp resistant to high temperatures

(300℃) with the following characteristics:
temperatures (300℃)with the following characteristics:
Voltage: 220-240V
Wattage: 25W
Type: E 14
Replace the glass cover. Reconnect the appliance to the mains power supply.
Cleaning the oven door /How to remove the oven doors
For a more thorough clean, you can remove and disassemble the oven door. Proceed as follows:
Oven door structures 1 remove and assemble procedure:
Open the door to the full extent(fig.1);

Open the lever A completely on the left and right hinges(fig.2);

Hold the door as shown in fig.3

Gently close the door(fig.3)until left and right hinge levers A are hooked to part B of the door(fig.4).

Withdraw the hinge hooks from their location following arrow C(fig.4);

Rest the door on a soft surface;

To replace the door, repeat the above steps in reverse order.

Fig.1
or online at www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838.
Fig.2
Care and maintenance
Fig.3
Fig.4
27