Snap-On MB200R Operation Manual

OPERATIONS MANUAL –MB200R

Introduction:

Congratulations on your purchase of the MB200R portable multi-function, engineered and manufactured by us. The
MB200R includes 1" X2 tweeter, 3" X2 mediant and 6" woofer that produces an even and smooth studio quality
sound in a sound reinforcement speaker. Our design goal was to build a speaker with accurate playback, smooth dis-
persion of mid and high frequencies, and an ergonomic design for easy transport and setup. The result is a sound
reinforcement system dynamic enough to use at home, in the studio, parties or in a home theater and outing use.

Features:

1. Steel basket woofer
2. Auxiliary line input
3. High Temperature Voice Coil
4. Stereo Sound output
5. Bluetooth Pairing
6. NFC function
7. USB Playing Charging
8. Built-in Rechargeable Battery(7.4V/6.6A)

Cautions:

1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electric shock, do not open the unit. There are NO REPLACEABLE PARTS INSIDE. Please refer
servicing to a qualified service technician.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of
damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.
8. Make sure ALL of your equipment is completely OFF and lower ALL VOLUME, LEVEL & GAIN controls before connect-
ing the speaker.
9. Rechargeable Battery Usage:
a. Please charge the battery timely when the power of the battery is used up.
b. After used, please charge the battery every three month.
c. If storage without charge for lone time, it may not be charge successfully anymore.
Disregarding any of the above will void your warranty!!!!!
Speaker