Snap-On KRA4059 CHEST Instructions

INSTRUCTIONS
WIRELESS CONNECTION
.
1 Move the ON/OFF switch on your Bluetooth Wireless Speaker to the "ON"
position (See Figure 1 on page 3). The Micro Box Bluetooth Wireless Speaker will
announce "Bluetooth Mode" and the blue light will flash on and off.
2. Turn on the Bluetooth Wireless capability on your device to make it discoverable to the
Bluetooth Wireless Speaker. See your device's instructions to add or setup a Bluetooth
Wireless device. The Bluetooth Wireless option can be found in the "Settings" or "Tools"
on most devices.
3. A menu will come up on your device showing the recognized Bluetooth Wireless device.
Tap on the "BT" option and the Bluetooth Wireless Speaker will acknowledge by saying
"Bluetooth Connected".
4. While the speaker is scanning to pair with your device, the blue light on the back of the
speaker will continue to flash. Once your device is discovered, the blue light will remain
solid.
You can now arrow back on your device to your applications menu where your music
5.
is to start playing your song selections.
AUX CONNECTION
1. Connect the Bluetooth Wireless Speaker to any device with a headphone jack or line out
using the included 3.5mm audio cable. Bluetooth Wireless Speaker will acknowledge by
saying "Audio Input".
2. The LED (red) will illuminate indicating a connection.
3. You can now arrow back on your device to your applications menu where your music
is to start playing your song selections.
WARRANTY
Thank you for purchasing the Snap-on® SSX16P106KO Bluetooth® Wireless Speaker. Your Bluetooth® Wireless Speaker is
guaranteed against defects in material and workmanship for the period of 1 Year including the date of purchase. This
warranty is limited to the original purchaser of product. Product found to be defective during that period will be repaired or
replaced by 4J International, Inc. at no charge.
This warranty is void if it is determined that unauthorized parties have attempted repairs or alterations of any nature.
Warranty does not extend to cosmetics or finish. Before presuming a defect is present in the product, be certain that all
related equipment and wiring is functioning properly. 4J International disclaims any liability for other incurred damages
resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this
warranty. 4J International's total liability will not exceed the purchase price of the product. A Return Material
Authorization number (RMA) is required before shipping product back to 4J International. Call 262-656-1956 to obtain
an RMA number.
Designed and Engineered in U.S.A. Made in China. Snap-on is a trademark of Snap-on Incorporated and used under license.
©2015 Snap-on Incorporated. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Snap-on Incorporated and 4J International is under license. Other trademarks and trade
names are those of their respective owners. Other trademarks and trade names are those of their respective owners.
4
BLUETOOTH SPEAKER KRA4059 CHEST