1. Manuals
  2. Brands
  3. Bikecomm Manuals
  4. Headsets
  5. BK-T1
  6. Operation manual

Bikecomm BK-T1 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

1. Package and Accessory /

Notes: 1. Headset Fixture is with cables to connect to speakers (Red connector),the microphone (Yellow
connector) and a two-way radio separately (Black Connector).
2. Only one microphone is included in the package and depending on the helmet type,you can choose
either to have Microphone for Full Face Helmet or Microphone for 3/4 Face Helmet.

2.Installation /

2.1 Headset Fixture Installation with the Adhesive Pad or the Spring Clip.
2.1.1 Install with Adhesive Pads
Remove the cover of adhesive pads at the back of the headset fixture and fix them to the helmet.
Note: Clean the area with the cleaning pad before applying the adhesive pads.
2.1.2 Install with the Spring Clip
1. Insert the spring clip from the lower edge by pushing it into the slot. The spring clip CANNOT be
removed after fixed. Please make sure of the direction before applying.
2. Mount the fixture to the helmet by pulling open the spring clip to attach it to the helmet.
BK-T1 Quick Operation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BK-T1 and is the answer not in the manual?

Questions and answers

Related Manuals for Bikecomm BK-T1

Summary of Contents for Bikecomm BK-T1

  • Page 1 BK-T1 Quick Operation Guide 1. Package and Accessory / Notes: 1. Headset Fixture is with cables to connect to speakers (Red connector),the microphone (Yellow connector) and a two-way radio separately (Black Connector). 2. Only one microphone is included in the package and depending on the helmet type,you can choose either to have Microphone for Full Face Helmet or Microphone for 3/4 Face Helmet.
  • Page 2 2.2 Mount the Headset into Fixture 2.2.1 Guide and slide the headset into the top left side of the fixture. 2.2.2 Press the headset down to secure it to the fixture and when a click sound is heard, the installation is completed.

  • Page 3: Volume Adjustment

    4.Installation / Two Way Radio Connector 4.1 Remove the cover of the two way radio pad and attach it to the outside of the helmet. 4.2 Do not remove it within 24 hours to make sure it is tightly secured. 5.Headset Buttons / Button: To select intercom with A1, A2 and A3.
  • Page 4 8.5 Please note that certain cost may still incur on rare occasions even within the warranty period. 9.G-Sensor Operation / By tapping on the headset, G-Sensor is activated to trigger various functions. G-Sensor sensitivity level could be adjusted by BK-T1 Tool Program downloaded from www.openroad.com.tw.
  • Page 5 11.1.5 Re-dial the last number: Press M button twice rapidly. 11.1.6 Speed Dial: Setting 3 Speed Dial Numbers in BK-T1 Tool Program and press M button 3 times to dial the 1st number, press M button 4 times to dial the 2nd number and press M button 5 times to dial the 3rd number.
  • Page 6 12.Headset Pairing for Intercom / 12.1 With BK-T1 #1 (1st BK-T1) powered on and press A button until the LED flashes blue rapidly. Or Press BK-T1 #1 A button and tap G-Sensor one time to make LED flash blue rapidly.
  • Page 7 15.2 Listen to the two way radio With BK-T1 connected to the two way radio, the audio from other two way radio can be heard all the time. If there are other audio sources (Mobile phone call, music and intercom) connected to BK-T1, as BK-T1 audio mixing function, you can hear these audio all together.
  • Page 8 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Table of Contents