4. Remove the Speaker (Squawker/L, Squawker/R).
7.35. Remove the Front bracket
1. Remove the Bottom support metal. (See section 7.33.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (GS02, GS09 and GH11).
4. Disconnect the connector (A51). (See section 7.4.)
5. Remove the screws (×3
Front bracket.
7.36. Remove
Board and GH-Board
1. Remove the Front bracket. (See section 7.35.)
2. Remove the screws (×5
3. Remove the screws (×4
4. Remove the Front shield case front and the Front shield
top.
, ×2
) and remove the
the
G-Board,
).
).
5. Remove the GH-Board.
6. Remove the screws (×2
7. Remove the screws (×3
8. Disconnect the connector (G51) and remove the G-
Board.
7.37. Remove the K-Board and
S-Board
1. Remove the Cabinet assy. (See section 7.25.)
2. Remove the Speaker (Squawker /L). (See section 7.34.)
3. Remove the screws (×5
shield L.
4. Disconnect the connector (S1).
5. Remove the screws (×2
unit.
GS-
6. Remove the screw (×1
28
) and remove the GS-Board.
).
) and remove the Bottom
) and remove the S-Board
) and remove the S-Board.