Removal Of Dn-Board; Removal Of D-Board; Removal Of P-Board - Panasonic TH-65PF11UK Service Manual

TH-65PF11UK
8.8.

Removal of DN-Board

1. Disconnect the connectors (DN3, DN5, DN9, PB31,
PB32, PB33, PB34, PB35, PB36, PB38).
2. Remove the flexible cables from the connectors (DN1,
DN2).
3. Remove 4 screws and then remove the DN-Board Block.
4. Remove 2 screws ( ) and then remove the PB-Board
Block.
5. Remove 2 screws ( ) and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
8.9.

Removal of D-Board

1. Remove the DN-Board Block.
(Refer to Removal of DN-Board)
2. Disconnect the connectors (D3, D5, D25).
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34, D35, D36).
4. Remove 4 screws and then remove D-Board.

8.10. Removal of P-Board

1. Disconnect the connectors (P2, P6, P7, P9, P11, P12,
P25).
2. Remove 8 screws and then remove P(MULTI)Board,
P(SUS)Board and Fixed Plate.
22