Advertisement
N.B.
All guy ropes need to follow the lines of the seams in the roof. Adjust the guy rope slider so you have approx. 50cm of loop to the
peg. This allows adjustment in both directions. It is important to make sure the tent is symmetrical, and that tension is evenly spread.
Work your way down using the Velcro to secure each
pole into place.
Zip the door shut, then using the thicker ribbed pegs,
peg out the guy ropes around the tent without putting
them under too much tension.
Using the small gold pole, thread through the sleeve on
the door canopy.
The pegs should be at least 1m from the tent.
7.
9.
11.
www.boutiquecamping.com
|
Ensure all poles are butted up tight to the seam and
groundsheet at the bottom.
Once the pegs are in, adjust the guy ropes (following the
seams) to create tension. This should create a perfectly
shaped Luna Tent without creases.
Put each pole into the black housing on each side of the
+44 (0) 203 394 2986
|
info@boutiquecamping.com
8.
10.
12.
door.
Advertisement
