Livio AI and Livio
Initial Fit Protocol
Get Started
1
Turn Bluetooth
OFF on Apple
®
2
Launch Inspire
X and insert a battery into
®
the hearing aids.
On the Get Started screen, select View
3
Programmers, then choose the 2.4 GHz
wireless programmer and select OK.
NOTE: Expected range for wireless
programming is 30 feet.
Initial Fit and Auto Path
Initial Fit launches automatically when programming new hearing aids.
Select the appropriate Acoustic Options, then select OK.
1
Select the appropriate Experience with Amplification.
2
[Fig 1] Refer to the Experience Manager QuickTIP for
additional information.
3
Insert hearing aids into the patient's ears, reduce all
sources of noise, then select Begin to run the Auto Path.
NOTE: If hearing aid programming is conducted prior
to the fitting appointment, re-run the Feedback Canceller
with the hearing aids in the patient's ears.
4
Review the Auto Path results screen. Select Restart if Status
is Incomplete for any steps, or select Close to continue.
or Android
device.
®
™
4
Select the check box next to the hearing aid(s)
to be programmed.
Select Read Device Settings to begin
5
a new fitting or for a follow-up fitting session
using the current settings in the hearing aids.
Load a Previous Session to retrieve a previously
saved session. Select Start.
Figure 1
Need help?
Do you have a question about the Livio AI and is the answer not in the manual?
Questions and answers