Step 4: Connecting The Mains Lead; Step 5: Preparing The Remote - Sony BDP - S1E Operating Instructions Manual

Step 4: Connecting the
Mains Lead
After all of the other connections are complete, connect the
supplied mains lead to the AC IN terminal of the player. Then
plug the player and TV mains lead (power cords) into the mains.
to mains
16
AC IN
to AC IN
Step 5: Preparing the
Remote
You can control the player using the supplied remote. Insert two
R6 (size AA) batteries by matching the 3 and # ends on the
batteries to the markings inside the battery compartment. When
using the remote, point it at the remote sensor on the player
(page 58).
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly
when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or a lighting
apparatus. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time, remove the
batteries to avoid possible damage from battery leakage and corrosion.