Ip Address Set-Up; Set-Up Client Ip Address; Set-Up Client Netmask; Set-Up Client Gateway - IBT SWITCH..IT Installation Manual

switch..it Installation Guide

IP Address set-up

Set-up Client IP Address

Turn the LCD wheel knob on the front panel to the right until you reach the menu entry Client IP Address.
1. Push the knob to enter the edit mode
2. Turn the knob to the right / left to put the cursor to one of the four address sub-segments.
3. Push the wheel knob again to edit the selected sub-segment and turn the wheel to the right, to
increment the address segment, or to the left to decrement the address segment.
4. To confirm the change of a sub-segment press once the wheel knob, this will also exit the sub-
segment edit mode.
5. Move to the next sub-segment and continue with point 2, or if you are finished to set-up all sub-
segments continue with point 6..
6. If you have entered the right values for all sub-segments, turn the wheel to the right until accept
changes appear and press the wheel knob once again, to confirm and exit the edit mode.
If you like to discard the changes turn the wheel knob to the left until discard changes will appear
and confirm by pressing wheel knob

Set-up Client Netmask

Turn the LCD wheel knob on the front panel to the right until you reach the menu entry Client Netmask.
Follow the instruction of "Set-up Client IP Address point 1-6"

Set-up Client Gateway

Turn the LCD wheel knob on the front panel to the right until you reach the menu entry Client Gateway.
Follow the instruction of "Set-up Client IP Address point 1-6"

Set-up NTP Server Address

Turn the LCD wheel knob on the front panel to the right until you reach the menu entry NTP Server
Address.
Follow the instruction of "Set-up Client IP Address point 1-6"

Set-up Unit Number

If the system is a single frame system unit number is by default "0.0.0.1"
Turn the LCD wheel knob on the front panel to the right until you reach the menu entry Unit Number
Follow the instruction of "Set-up Client IP Address point 1-6"

Getting started

Go to http://www.ibt-interfaces.de/download-support/
Section switch...it Downloads
1. Load the latest "switch...it quick start guide"
2. Load the latest "switch...it Panel installation guide"
IBT Interfaces, Schwalbenstr. 6, 63322 Rödermark
Tel. +49 (0) 6074 / 69 64 16-0
Fax. +49 (0) 6074 / 69 64 16-1
E-Mail: sales@ibt-interfaces.de
Web: www.ibt-interfaces.de
Subject to change date: 09.12.2016
Page 4