Signal Timing; Data Ordering - CDI EMS 4 User Manual

Signal Timing

shows a timing chart for the case where the host device triggers a data transfer by
Figure 1-1
asserting the active-low request signal (/REQ). The gage then sends data (the DATA signal) that
is clocked by the CK line. In this case, the data ready (RDY) line is not applicable.
Figure 1-2 shows a timing chart for the case where the gage asserts its active-low data ready
signal (/RDY) to indicate that a new gage measurement is available. This triggers a data
transfer that is initiated by the host device.

Data Ordering

19