Electrolux EWW 127470 W User Manual page 25

Steam system
Hide thumbs Also See for EWW 127470 W:
Table of Contents

Advertisement

: problem with the water supply.
: problem with the water draining.
: door open.
Once the problem has been eliminated,
press the button 8 to restart the pro-
Problem
The machine does not start:
The machine does not fill:
The machine does not
empty and/or does not
spin:
There is water on the floor:
gramme. If after all checks, the problem
persists, contact your local Service Centre.
Possible cause/Solution
The door has not been closed. E40
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button 8 has
not been pressed.
• Please turn the selector dial and press the button 8 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay
start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
The water tap is closed. E10
• Open the water tap.
The inlet hose is squashed or kinked. E10
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.E10
• Clean the water inlet filters (See "Cleaning the water inlet filters"
for more details).
The door is not properly closed. E40
• Close the door firmly.
The drain hose is squashed or kinked. E20
• Check the drain hose connection.
The drain filter is clogged. E20
• Clean the drain filter.
An option or a programme that ends with the water still in the tub
or a that eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Too much detergent or unsuitable detergent (creates too much
foam) has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fit-
tings. It is not always easy to see this as the water runs down the
hose; check to see if it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Change it with a new one.
The emergency emptying cap has not been replaced or the filter
has not been properly screwed in after cleaning action.
• Refit the emergency emptying cap or screw the filter fully in.
electrolux 25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents