Advertisement
Before you start
We suggest that you inventory the parts according to the contents list to be sure the kit is complete. If not please
contact us for replacements.
Contents
75ft of #24 stranded wire
BNC connector (1)
Dipole center insulator PCB (1)
Trap capacitors PCB (2)
Coil forms (2)
27pF 3KV capacitors (4)
Clear heat shrink tubing (2)
End insulators (2)
1. Wire Preparation
Measure and cut the supplied wire to the following lengths*:
● 2 Sections each measuring 8 feet, 3 inches (outer antenna sections)
● 2 Sections each measuring 17 feet, 0 inches (inner antenna sections)
● 2 Sections each measuring 10 feet, 3 inches (coil windings)
These measurements include extra wire for making connections at the traps and center insulator and trimming to
final length
*Note: Measure carefully and double check the lengths of wire before cutting to reduce any errors. The old saying
that applies here is "measure twice, cut once"
Traps
2040DipoleV2_20180214
2
Advertisement
