All Rights Reserved – Printed in Acura Embedded Systems Inc. Disclaimer Acura Embedded Systems Inc shall not be liable for technical or editorial errors or omissions contained here; nor for incidental or consequential damages resulting from using this material, or the performance or use of this product.
General Information Introduction AcuPower-120EPS is a AC-DC/DC-DC Power Supply that supplies 24-28 V and 120W outputs. It is a IP67 Rated Power Supply for use in hazardous locations where fire or explosion hazards may exist due to flammable gases or vapors, flammable liquids, combustible dust, or ignitable fibers.
AcuPower-120EPS Technical Specification System Size / Type 120W Switching Power Supply DC Output Voltage 24V/5A Line Regulation ±0.5% Load Regulation ±1.0% Frequency Range 47-63Hz Input Voltage Range 100-240V 2.1A Efficiency Environment Operating Temp. -30ºC to 70ºC (-22ºF to 158ºF) Storage Temp.
System Setup Exploring AcuPower-120EPS AcuPower-120EPS is a high efficiency, rugged power supply with an Input Voltage range 100-240V, 2.1A and supplies 24V DC output. It is also tested and certified to the IP67 standard, and it is the ideal solution to provide power in harsh conditions or locations.
AcuPower-120EPS DC Output (24V 5A) – 4pin female Detail Wire Color Black Green I/O Connection To device (4pin female) To AC To DC From AC Output Input Source (4pin male) (3pin female)
AcuPower-120EPS DC cable Detail Wire Color Black Green 4pin female 4pin male (to (to computer) AcuPower) AC cable Detail Wire Color Line Black Ground Green Neutral White 3pin female AC Plug (to AcuPower)
Page 10
With the unique set of products, Acura Embedded Systems remains committed to its goal of providing trouble-free and customer-friendly service. A special customer service unit has been set up specifically to cater to our esteemed customers' needs. Technical Support: For technical support contact your Salesperson support@acuraembedded.com...