Table of Contents
Advertisement
Timer Function
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby (
2
Press Timer/Clock until
TIMER is displayed.
3
Press Program/Set.
Result: ON TIME is displayed (instead of the equalizer symbols) for a
few seconds, followed by the switch-on time already set. You
can now set the timer switch-on time.
4
Set the timer switch-on time.
a
Set the hour by pressing
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing
d
Press Program/Set.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by the switch-off time already
set. You can now set the timer switch-off time.
5
Set the timer switch-off time.
a
Set the hour by pressing
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing
d
Press Program/Set.
Result: VOL 10 is displayed, where 10 corresponds to the
volume already set.
6
Press
and
to adjust the volume level and press Program/Set.
Result: The source to be selected is displayed.
7
Press
and
to select the source to be played when the
system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press Program/Set to confirm the timer.
9
Press on/stanby (
) to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can also use Multi Jog of the
.
Steps 4, 5, 6, 7
18
) .
and
.
and
.
and
.
and
.
You must also...
Insert a cassette tape.
a Press Program/Set.
b
Select a preset station by pressing
and
.
Load a compact disc.
/
buttons in
1,9
3,4,5,6,7,8
4,5,6,7
Cancelling the Timer
After having set the timer, it will start automatically as shown by the
TIMER indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (with the system on or in standby
mode).
To...
Cancel the timer
Restart the timer
2
4,5,6,7
Press Timer On/Off...
Once.
Result:
is no longer displayed.
Twice.
Result:
is displayed again.
Advertisement
Table of Contents
