Viewing The Various Functions On Your System; Setting The Clock - Sonic Blue Rio EX1000 User Manual

Viewing the Various Functions on Your
System
You can view the various functions available on your system.
1
Press the Demo button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this guide.
For instructions on how to use them, refer to the appropriate sec-
tions.
2
To cancel this function, press Demo again.
10

Setting the Clock

Your system is equipped with a clock, which allows you to turn your
system on and off automatically.
You should set the clock:
When you first purchase the Executive Shelf System
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start over.
1
Switch the system on by pressing On/Standby (
remote.
2
Press Timer/Clock twice to display CLOCK.
3
Press Program/Set to display the flashing hour.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Program/Set.
Result: The minutes will then flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed.
You can display the time, even when you are using another func-
tion, by pressing Timer/Clock once.
You can use the Multi Jog dial instead of the
Steps 4,6.
1
3,5,7
4,6
) on the
Press...
Press...
/ buttons in
2
4,6