Page 2
DryCal MFS Specifications Table of Contents DryCal MFS Features Dimensions (H x W x D) 7.75 x 14.25 x 9.75 inches • 197 x 362 x 248 mm Warnings Weight 27 lbs • 12,247 g 3 .0 General Description Theory of Operation Flow Range 10 –...
The porous metal restrictors used in the pressure source Bios DryCal MFS system resist such physical change because of the lower veloci- ties and virtual absence of erosion, resulting in more consistent, reliable flow...
Toggle the 1K—2K valve to the on (down) position. Set the First Stage regulator (80—100 PSI.) Should the need for service arise, please contact Bios International for a RMA Adjust the Second Stage regulator (30—60 PSI.) number prior to returning your MFS for service. You can telephone Bios at Toggle the 1K—2K valve to the off (up) position.
Page 5
Limited Warranty Notes The Bios DryCal MFS is warranted to the original end user to be free from defects in materials and workmanship under normal use and service for a period of 1 year from the date of purchase as shown on the purchaser’s receipt. If the unit was pur- chased from an authorized reseller a copy of an invoice or packing slip showing the date of purchase may be required to obtain warranty service.
Need help?
Do you have a question about the DryCal Multiple Flow Source and is the answer not in the manual?
Questions and answers