Push-To-Talk; Using Handset; Using Headset; Speed Dial - Alphatron AlphaConnect Classic Operation Manual

4.3.2.2 Push-to-talk

Perform the following steps to make a push-to-talk call with the standalone hands-free only communication station:
1. Dial number using the numeric keys
2. Press the push-to-talk key
3. Await dialing and the answering
4. Conduct the conversation using the push-to-talk key whenever speaking
5. Terminate by pressing the hands-free key

4.3.2.3 Using handset

Perform the following steps to make call using the handset:
1. Lift handset from its cradle and await the continuous dial tone to sound
2. Dial the number
3. Await the answering
4. Conduct the conversation
5. Terminate call by replacing handset

4.3.2.4 Using headset

Perform the following steps to make call using the headset:
1. Press F1 for more than 1 second and await the continuous dial tone to sound
2. Dial the number
3. Await answering
4. Conduct the conversation
5. Terminate call by pressing the hands-free key

4.3.2.5 Speed dial

For quick and fast dialing, the F1-F3 works as speed dial keys – if programmed as such. Pressing one of them and the
phone will call one of the 3 pre-programmed numbers.

4.3.2.6 Memory dial

Press M and then F1-F3 and the display will show name and number of the selected memory location. Press F1-F3 for
selecting memory location or use '▼' or '▲' to scroll through M1 to M6 or 'M' to jump from M1-M3 to M4-M6.

4.3.2.7 Last number redial

To re-dial last number, press 'R' and lift the handset or press speaker.

4.3.2.8 Call list and redial

There are two call lists in the memory. One for outgoing calls, one for incoming calls. Each list has 10 entries indexed
from 1 to 10 where 1 is the latest. When entering the list, latest call is shown. Use '▼' or '▲' to scroll through the list. The
list will roll from 10 to 1 or from 1 to 10.
Calls marked with '!' in incoming call list, are missed calls.
If the phone is indicating a lost call when idle, '▼' or '▲' works as short cut to incoming call log.

4.3.3 Receiving calls

An incoming call is accepted by pressing the speaker button – entering hands free, by pressing the PTT button –
entering PTT mode conversation, by lifting the handset – entering a normal handset conversation, or by pressing the F1
or PTT of the headset.
54 | Operation of communication stations