Huawei P30 lite User Manual page 76

Use NFC to send data: Open
Huawei Beam. Select the files you want to send and touch Share > Huawei Beam. Keep your
Phone unlocked and the screen on. Place the NFC detection areas of both devices close together.
Once a connection is established, the transmitting device will play an audio alert and minimize the
sharing screen. Touch the transmitting device's screen to send files.
Receive files over NFC: Open
Huawei Beam. Keep your Phone unlocked and the screen on. Place the NFC detection areas of both
devices close together. Once a connection is established, the transmitting device will play an audio
prompt. After the prompt, please wait for the file transfer to complete. Received files are saved by
default to the Beam folder of your Files.
If there is an option to enable Read and write/P2P on the NFC screen, ensure that it is enabled.
Features may vary depending on your carrier.
Use NFC to Quickly Establish Connections between Devices.
Place the NFC detection areas of two devices close together to quickly establish a Bluetooth or Wi-Fi
connection between them. You can also use this method to establish a Wi-Fi Direct connection or
share a Wi-Fi hotspot without searching for devices, pairing and entering connection details manually.
Only MAR-LX1A and MAR-LX1M support NFC. Please keep the NFC area close to other devices or
objects while using the NFC function.
Settings, touch Device connectivity and enable NFC and
Settings, then touch Device connectivity and enable NFC and
Device Connection
72