Merax MS036311 User Manual page 6

 SADDLE ASSEMBLY
Loose the lock knob and pull out, insert
saddle
opening tube, then tighten the lock knob.
Loose the lock nut to select the correct
position and fix the nut.
Place
adjustment frame and tighten the saddle
locking nuts.
 HANDLE & MONITOR ASSEMBLY
Loose the lock knob and insert the handle
frame assembly into the opening tube,
and tighten the lock knob when the
handle frame at desired position.
Attach the monitor holder to the handle
frame and fix the monitor, connect sensor
wire into the monitor.
- Assembling Finish -
5
post assembly into
the saddle onto
the rear
the saddle