Troubleshooting; Disposal And Recycling - Elinchrom ELB 500 User Manual

User Manual
DANGER!
ELECTRICAL, CHEMICAL AND MECHANICAL HAZARDS
• Avoid housing contact with oils, grease etc. The plastic might
be damaged by chemicals and solvents.
• The housing should not be removed.
CHARGING INSTRUCTIONS
• Connect the ELB 500 Charger (19277) first to the mains and
then to the ELB 500 Battery.
• Charge progress is displayed by a flashing red LED.
• The flashing green LED indicates that the battery is
completely charged.
EN
• The ELB 500 Battery charges in approximately 90 minutes.

TROUBLESHOOTING

NO LED's ARE LIGHTING UP: The charging process is not
possible or the charger is out of order. Please contact your local EL
distributor.
SERVICE AND REPAIR
Only the authorized Elinchrom service agent is permitted to repair
this charger.

DISPOSAL AND RECYCLING

This device has been manufactured to the highest standards from
materials, which can be recycled or disposed of in a manner that is
not environmentally damaging.
4