Ev3000-D Wiring - EAGLE VISION EV3000-D User Manual

EV3000-D manual

5. EV3000-D Wiring:

1) AC 24V Power Connection Terminals (Use AWG16 or 18 Wire)
-AC24V POWER
2) Earth Terminal
-CONNECT EARTH LINE TO
2) Thermal camera Video Connection Terminals
-THERMAL VIDEO (BNC)
-THERMAL SVIDEO (4-PIN DIN CONNECTOR)
3) Day/night camera Video Connection Terminal
-DAY/NIGHT VIDEO (BNC)
4) RS422 Data Communication line Connection Terminals
-TX+ (FROM EV3000-D TO OUTSIDE CONTROLLER or PC)
-TX- (FROM EV3000-D TO OUTSIDE CONTROLLER or PC)
-RX+ (FROM OUTSIDE CONTROLLER or PC TO EV3000-D)
-RX- (FROM OUTSIDE CONTROLLER or PC TO EV3000-D
-SHIELD: NO CONNECTION or CONNECT SHIELD WIRE OF
OUTSIDE RS-422 DATA COMMUNICATION LINES
5) Pump Connection Terminals: Connect to DC24V+, DC24V- Terminals
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
-AC24V COM
Terminal
www.unitedvisionsolutions.com