Page 1
United Vision Solutions 10 Center St. , Chicopee, MA 01013, USA Email: sales@unitedvisionsolutions.com Email: info@unitedvisionsolutions.com Sales Dept. 413-592-8477...
Page 2
COMMERCIAL–IN-CONFIDENCE United Vision Solutions, Co. HomeLand Security Products & Solutions Eagle Vision EV3000-D IR Dual camera system for 24/7 surveillance Stainless Steel 316L enclosure and Pan/Tilt tedvis EXPLOSION PROOF Exd IIC T5 Forget rust and salt air corrosion United Vision Solutions, Co.
Page 3
System Highlights Day/Night Camera Thermal Imager Tri-FOV – 1/2” High-Resolution EMCCD 7.5-13.5μ Uncooled – 0.00025 Lux Minimum Illumination 320x240 VOx – Lens 10-300mm 2X Electronic Zoom – Reproduces full colour, full motion 100 mm lenses images in starlight conditions Pan/Tilt resolution Sensor Platform High performance, brushless, –...
Page 4
PTZ camera, without an operator. System Features Forming part of the “Eagle Vision Camera” EVST series of fully stainless steel camera housig, and PT units, the EVST stainless steel range has been designed to offer an extremely reliable, robust and...
Page 6
Mechanical Image sensor 1/2” EMCCD night vision camera Drive unit Integral pan/tilt motor drive Active P ixels 658 x 496 P ixel Pan angle 0-350° (continuous rotation is option) 319 k Pixel Pan speed 0.1° to 50° per second Filter Tilt angle -70°...
Page 7
TECHNICAL DATA The EV3000-D IR model is a self-contained day and thermal imaging system, the EV-ST IR camera which detects radiation in the 7.5 to 13.5 µm infrared band. Th e EV-ST is capable of target discrimination and recognition in total darkness or through daylight obscurants and was designed for short- or long-term stationary surveillance applications.
Page 8
• Auto gain and level control The EV3000-D IR model is UVS Systems’ next generation imager benefiting from unique developments aimed at mproving signal processing and imaging performance. Using High Resolution Video Processor (HRVP) generates the EV3000-D IR model’s high quality images and long-range performance.
Page 15
Day/Night CCTV Camera System EXTREME LOW LIGHT COLOUR VIDEO CAMERA 0.00025 Lux Minimum Illumination Reproduces full colo ur, full motion Achieves sensitivity images in starlight conditions and dynamic range in in ALL light conditions excess of current Electron Multiplying CCD (EMCCD) Generates new electrons dramatically increasing sensitivity at very fast generation night-vision...
Page 16
EXTREME LOW LIGHT COLO UR VIDEO CAMERA APPLICATIONS Suggested applications for i t c the camera: E ective Picture Element 319 k Pixel • Military Video Output Signal VBS (NTSC:BNC), Y/C • Bio Science • Scienti c • Non-Destructive Testing o i t •...
Page 17
CCTV LENSES DAY & NIGHT 30x Motorized Zoom 10-300mm...
Page 18
L L ong Rang g e Du u al C C ame e ra Sy y stem m Eagle e Vi sion SER’S S MA ANUA V3000 Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. '2008 United Vision solutions, Co., Speci cations are subject to change.
Page 19
EV3000-D manual Important Notice The manual is organized into two main sections, section A describes the system components, system installation, and section B describes system operation. EXPORT CONTROL Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
Page 20
EV3000-D manual United Vision solutions, Co. Warranty Policy United Vision solutions, Co. warrants its products to be free from defects in materials and workmanship for 365 days from the date of shipment to the customer. Other items such as accessories purchased for resale with minor modifications may carry a shorter warranty. During the warranty period, United Vision solutions, Co will, at its option, either repair or replace any products found to be defective.
Page 21
EV3000-D manual Safety Summary This manual describes processes that may cause in ury or death to personnel, or damage to equipment if not properly followed. This safety summary includes general safety precautions and instructions that must be understood and applied during operation and maintenance to ensure personnel safety and protection of equipment.
3. EV3000-D installation Notes 4. EV3000-D Drawing 5. EV3000-D wiring 6. EV3000-D Enclosure Wiring 7. EV3000-D Protocol & Control command list 8. EV3000-D Address & Baud rate Setting 9. Warranty 10. Appendix Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
EV3000-D manual 1. Introduction The EV3000-D is an Explosion Proof Type Pan Tilt Driver & Camera System with two Cameras and Camera Control Unit. The 1 camera is infrared (IR) camera intended for use during dark or night time, as a long range thermal imaging surveillance system and the other is Day/Night camera plus zoom lens.
Page 26
The Eagle Vision can detect and distinguish a moving subject from over 400m (approx. 440yds) away in a pitch-dark environment, and send the image to a military command center for immediate response.
Page 27
EV3000-D manual Electrical Power Source 100 to 240 VAC 50-60 Hz On from Standby 3 seconds External Supply 12 Vdc, 3 Amps Physical 22 lbs (10 kg) Weight, Imaging Head Dimensions (nominal) L x Diameter Inches 22 x 9 56 x 13.5 Operating Temp -32°C to +55°C...
Page 28
EV3000-D manual C- Pan/Tilt and Enclosure Materials Stainless steel 316L Enclosure Pressurized rugged fill with Dry Nitrogen which prevents condensation inside the tube Wiper 24 VAC wipers, one for each enclosure Washer Pump with 10 ltr water tank Rotating angle Pan 0°to 360°/ Tilt -90°to +90°±5°...
You must make an expert examine the accessories whether they have the same specific character when you need replacement of them. You must install AC24V power source near the EV3000-D (within 10m) Otherwise The EV3000-D will probably malfunction due to AC voltage drop or critical noise etc.
3) Day/night camera Video Connection Terminal -DAY/NIGHT VIDEO (BNC) 4) RS422 Data Communication line Connection Terminals -TX+ (FROM EV3000-D TO OUTSIDE CONTROLLER or PC) -TX- (FROM EV3000-D TO OUTSIDE CONTROLLER or PC) -RX+ (FROM OUTSIDE CONTROLLER or PC TO EV3000-D)
DC 12V SUPPLY FOR DEFROSTER Please connect lead wires from thermal camera correctly to these terminals. Otherwise,Electronic devices in EV3000-D receiver may be damaged. Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
Page 33
EV3000-D manual 6-2 Day/night camera connection at Day/night camera terminal SIGNAL NAME FUNCTION DC 12V + DC 12V CAMERA POWER DC 12V - DC 12V CAMERA POWER RETURN ZOOM+ ZOOM MOTOR+ ZOOM- ZOOM MOTOR- FOCUS+ FOCUS MOTOR+ FOCUS- FOCUS MOTOR-...
Page 34
36-pin connection terminals in thermal camera enclosure (only 33 terminals are used) a. “D” of 36-pin Terminals means down-side(lower-side) 12 ea of terminals(Terminal No.1~12). You can find that Pin No.9 is empty (Not connected) on above Fig 1 b. “UP” of 36-pin Terminals means up-side(upper-side) 12 ea of Terminals(Terminal No.13~24).
EV3000-D manual 7. EV3000-D Protocol & Control command list Note: Bit Definition of Byte 3 Bit 6 is used to select Camera Between "DAY/NIGHT" Camera with Lens and the thermal Camera. If set to "1", the Camera is Selected to DAY/NIGHT Camera.
Page 36
EV3000-D manual 1. Command List for EV3000 D(Basic format is PELCO D) : Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Pan Left Command Receiver Checksum EV3000-D Response Description Receiver ID=00h~FEh, P1 = 00h ~ 3Fh : Pan Speed Command...
Page 37
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Pan Left Command Receiver Checksum & Tilt Down EV3000-D Response Description Receiver ID=00h~FEh, P1=00h~3Fh: Pan Speed ,P2 = 00h ~ 3Fh : Tilt Speed Command Receiver Checksum Right & Tilt...
Page 38
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Narrow Command Receiver Checksum field view EV3000-D camera 2 Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) Focus Command Receiver...
Page 39
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Clear Command Receiver P_ID Checksum Preset EV3000-D Response Description Receiver ID=00h~FEh, P_ID=00~7Fh,The Receiver Clears Current Pan, Tilt, Zoom, Focus Position of Camera 1 in EEPROM. Goto Command Receiver P_ID Checksum...
Page 40
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Turn on Command Receiver Checksum Wiper at Camera EV3000-D Response Description Receiver ID=00h~FEh, 0Bh of Byte 6=Wiper of Camera 2. Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2 and The Wiper of Camera 2 Will be Driven for Several Seconds.)
Page 41
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Menu Command Receiver Checksum selection left EV3000-D pressed Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) Menu Command Receiver Checksum...
Page 42
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Toggle Command Receiver Checksum e-zoom EV3000-D Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera(Clear Bit 6 of Byte3 to Select Camera 2.) Command Receiver Checksum position EV3000-D Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera(Clear Bit 6 of Byte3 to Select Camera 2.)
Page 43
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Command Receiver 00~02h Checksum auto/on/ EV3000-D Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) Byte 6 = 1 (It will set to continuous auto...
Page 44
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) DC 12V IR power supply of Thermal camera Will be electrically Turned On by EV3000-D Receiver Without any command sending to thermal camera (default state).But...
Page 45
EV3000-D manual 2.Command List for Thermal camera (Basic format is PELCO D) : Internal Communication Commands between EV3000 D Receiver and Thermal camera(4 Bytes command response) Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Toggle Polarity Command Checksum Thermal Receiver...
Page 46
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Power state on Command Checksum Thermal Receiver camera Response Toggle palette Command Checksum Thermal Receiver camera Response Toggle Command Checksum sensitivity Thermal Receiver camera Response Toggle e-zoom Command Checksum Thermal...
Page 47
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Power state Command Checksum sleep Thermal Receiver camera Response Narrow field of Command Checksum view Thermal Receiver camera Response Wide field of Command Checksum view Thermal Receiver camera Response Focus...
Page 48
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Adjust white Command 00~01h balance(M-G) Thermal Receiver camera Response Adjust gain Command 00~01h Thermal Receiver camera Response Adjust auto iris Command 00~01h level Thermal Receiver camera Response [Note for Byte 2] Byte 2 is EV3000 D receiver address which can be adjusted from "0~254".
EV3000-D manual 9. WARRANTY z Product Warranty MODEL No. EV3000-D SERIAL No. Date of purchased Place of Purchased If the product breaks down during proper use, it will be repaired within 1 year from the date of purchase free of charge Please contact us: Tel.
Page 51
Clean as required with nonabrasive household cleaner. A.3 Handling Use care to ensure that the EV3000-D is not excessively bumped or dropped. Even though the EV3000-D is a rugged instrument, it should be treated very carefully like any other sophisticated camera.
Page 52
EV3000-D manual Appendix B Glossary Atmospheric Attenuation – The amount of radiated IR energy that is absorbed by the atmosphere. It is a function of the temperature and humidity, particles in the air (i.e. fog, smoke, smog, etc.) and wavelength, among other factors.
Page 53
EV3000-D manual Instantaneous Field of View (IFOV) - A measure of the spatial resolution of an IR detector. It is defined as the angle seen by an individual pixel in the FPA and is measured in milliradians. Kelvin Temperature Scale - Absolute temperature scale related to the Celsius (or Centigrade) scale. 0°...
Page 54
EV3000-D manual RS232 - Serial communication standard using two wires – transmit and receive – and a common ground. Used for relatively short (<10 meter) cable runs. RS422 – Serial communication standard using four wires – a transmit differential pair and a receive differential pair.
Page 55
EV3000-D manual For repair/service, or Call Customer Service if problem(s) still +1-413-592-8477 exist after tech@unitedvisionsolutions.com troubleshooting To order additional Call sales Contact us items and/or 1-413-250-0903 accessories sales@unitedvisionsolutions.com info@unitedvisionsolutions.com For application support Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
Page 56
United Vision Solutions 10 Center St. , Chicopee, MA 01013, USA Email: sales@unitedvisionsolutions.com Email: info@unitedvisionsolutions.com Sales Dept. 413-592-8477...
Page 57
COMMERCIAL–IN-CONFIDENCE United Vision Solutions, Co. HomeLand Security Products & Solutions Eagle Vision EV3000-D IR Dual camera system for 24/7 surveillance Stainless Steel 316L enclosure and Pan/Tilt tedvis Forget rust and salt air corrosion United Vision Solutions, Co. 10 Center St., Chicopee, MA, 01013, USA.
Page 58
System Highlights Day/Night Camera Thermal Imager Tri-FOV – 1/2” High-Resolution EMCCD 3-5 micron InSb detector – 0.00025 Lux Minimum Illumination 640X480 format – Lens 10-500mm / 20-1000mm DFOV – Reproduces full colour, full motion 100/500 mm lenses images in starlight conditions Pan/Tilt resolution Sensor Platform High performance, brushless,...
Page 59
Thermal Imager and Day-Night camera Reproduces full colour, full motion images in starlight conditions Truck at 22km...
Page 60
Mechanical Image sensor 1/2” EMCCD night vision camera Drive unit Integral pan/tilt motor drive Active P ixels 658 x 496 P ixel Pan angle 0-350° (continuous rotation is option) 319 k Pixel Pan speed 0.1° to 50° per second Filter Tilt angle -70°...
Page 61
TECHNICAL DATA The EV3000-D IR model is a self-contained day and thermal imaging system, the EV-ST IR camera which detects radiation in the 3.4 to 5.1-micron infrared band. The EV-ST is capable of target discrimination and recognition in total darkness or through daylight obscurants and was designed for short- or long-term stationary surveillance applications.
Page 62
• S-video and RS170 outputs The EV3000-D IR model is UVS Systems’ next generation imager benefiting from unique developments aimed at mproving signal processing and imaging performance. Using High Resolution Video Processor (HRVP) generates the EV3000-D IR model’s high quality images and long-range performance.
Page 63
EV3000-D IR camera system EV3000-D IR with Focal Length 100/500 mm F number WFOV NFOV 5.5° x 4.1° 1.1° x 0.8° IFOV, Wide / Narrow 0.15 mrad 0.03 mrad Range miles Man Size Target Identification 2 Recognition 4 Detection 12...
Page 64
Hyperfocal distance is the distance beyond which all objects are acceptably Min focus and hyperfocal are parameters related to focus adjustment not for range When you are zooming in range 10 meters to 1500 meters you will find image crispy and really you will need to adjust focus.
Page 65
The HRVP (High Resolution Video Processor) board is a powerful digital image processing platform that provides an array of features designed for use in the EV3000-D IR model thermal imagers. The HRVP will output corrected IR video in color (or monochrome), NTSC/PAL video format.
Page 66
NETD The EV3000-D IR model has an NETD of less than 40mk@23 C. Most camera systems will exceed the requirement, and the typical system NETD is 35mk. This sensitivity is a result of a highly sensitive detector array, efficient f/4 optics and high-performance electronics.
Page 67
Day/Night CCTV Camera System EXTREME LOW LIGHT COLOUR VIDEO CAMERA 0.00025 Lux Minimum Illumination Reproduces full colo ur, full motion Achieves sensitivity images in starlight conditions and dynamic range in in ALL light conditions excess of current Electron Multiplying CCD (EMCCD) Generates new electrons dramatically increasing sensitivity at very fast generation night-vision...
Page 68
EXTREME LOW LIGHT COLO UR VIDEO CAMERA APPLICATIONS Suggested applications for i t c the camera: E ective Picture Element 319 k Pixel • Military Video Output Signal VBS (NTSC:BNC), Y/C • Bio Science • Scienti c • Non-Destructive Testing o i t •...
Page 69
CCTV LENSES DAY & NIGHT 50x Motorized Zoom 10-500mm / 20-1000mm (2x Ext.) ” 2 10- 500 mm /20-1000mm (with 2ex.) F4.0 - 125(360) /F8.0-250(720) (with 2ex.) WIDE 43.6 (D) x 35.5 (H) x 27.0 (V)° : 22.6 (D) x 18.2 (H) x 13.7 (V)° (with 2ex.) Angle of View (HxW) TELE 0.9 (D) x 0.7 (H) x 0.6 (V)°...
Page 70
L L ong Rang g e Du u al C C ame e ra Sy y stem m Eagle e Vi sion SER’S S MA ANUA V3000 Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. 2008 United Vision solutions, Co., Speci cations are subject to change.
Page 71
EV3000-D manual Important Notice The manual is organized into two main sections, section A describes the system components, system installation, and section B describes system operation. EXPORT CONTROL Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
Page 72
EV3000-D manual United Vision solutions, Co. Warranty Policy United Vision solutions, Co. warrants its products to be free from defects in materials and workmanship for 365 days from the date of shipment to the customer. Other items such as accessories purchased for resale with minor modifications may carry a shorter warranty. During the warranty period, United Vision solutions, Co will, at its option, either repair or replace any products found to be defective.
Page 73
EV3000-D manual Safety Summary This manual describes processes that may cause injury or death to personnel, or damage to equipment if not properly followed. This safety summary includes general safety precautions and instructions that must be understood and applied during operation and maintenance to ensure personnel safety and protection of equipment.
3. EV3000-D installation Notes 4. EV3000-D Drawing 5. EV3000-D wiring 6. EV3000-D Enclosure Wiring 7. EV3000-D Protocol & Control command list 8. EV3000-D Address & Baud rate Setting 9. Warranty 10. Appendix Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
EV3000-D manual 1. Introduction The EV3000-D is a Dual Camera system with Pan Tilt Driver & Camera System with two Cameras and Camera Control Unit. The 1 camera is infrared (IR) camera intended for use during dark or night time, as a long range thermal imaging surveillance system and the other is Day/Night camera plus zoom lens.
Page 77
EV3000-D manual 2. Specifications A- Thermal Camera Thermal Camera EV4000 Camera Specification Sensor Staring FPA Sensor type InSb Detector Material 640 X 480 Array Size 3.4-5.1μm Spectral Band IDCA FPA Cooling 6-8 min Cooldown Time Optics 100/500 mm Focal Length F number 5.5°...
Page 78
The Eagle Vision can detect and distinguish a moving subject from over 400m (approx. 440yds) away in a pitch-dark environment, and send the image to a military command center for immediate response.
Page 79
EV3000-D manual Electrical Power Source 100 to 240 VAC 50-60 Hz On from Standby 3 seconds External Supply 12 Vdc, 3 Amps Physical 22 lbs (10 kg) Weight, Imaging Head Dimensions (nominal) L x Diameter Inches 22 x 9 56 x 13.5 Operating Temp -32°C to +55°C...
Page 80
EV3000-D manual C- Pan/Tilt and Enclosure Materials Stainless steel 316L Enclosure Pressurized rugged fill with Dry Nitrogen which prevents condensation inside the tube Wiper 24 VAC wipers, one for each enclosure Washer Pump with 10 ltr water tank Rotating angle Pan 0°to 360°/ Tilt -90°to +90°±5°...
You must make an expert examine the accessories whether they have the same specific character when you need replacement of them. You must install AC24V power source near the EV3000-D (within 10m) Otherwise The EV3000-D will probably malfunction due to AC voltage drop or critical noise etc.
3) Day/night camera Video Connection Terminal -DAY/NIGHT VIDEO (BNC) 4) RS422 Data Communication line Connection Terminals -TX+ (FROM EV3000-D TO OUTSIDE CONTROLLER or PC) -TX- (FROM EV3000-D TO OUTSIDE CONTROLLER or PC) -RX+ (FROM OUTSIDE CONTROLLER or PC TO EV3000-D)
DC 12V SUPPLY FOR DEFROSTER Please connect lead wires from thermal camera correctly to these terminals. Otherwise,Electronic devices in EV3000-D receiver may be damaged. Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
Page 85
EV3000-D manual 6-2 Day/night camera connection at Day/night camera terminal SIGNAL NAME FUNCTION DC 12V + DC 12V CAMERA POWER DC 12V - DC 12V CAMERA POWER RETURN ZOOM+ ZOOM MOTOR+ ZOOM- ZOOM MOTOR- FOCUS+ FOCUS MOTOR+ FOCUS- FOCUS MOTOR-...
Page 86
36-pin connection terminals in thermal camera enclosure (only 33 terminals are used) a. “D” of 36-pin Terminals means down-side(lower-side) 12 ea of terminals(Terminal No.1~12). You can find that Pin No.9 is empty (Not connected) on above Fig 1 b. “UP” of 36-pin Terminals means up-side(upper-side) 12 ea of Terminals(Terminal No.13~24).
EV3000-D manual 7. EV3000-D Protocol & Control command list Note: Bit Definition of Byte 3 Bit 6 is used to select Camera Between "DAY/NIGHT" Camera with Lens and the thermal Camera. If set to "1", the Camera is Selected to DAY/NIGHT Camera.
Page 88
EV3000-D manual 1. Command List for EV3000 D(Basic format is PELCO D) : Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Pan Left Command Receiver Checksum EV3000-D Response Description Receiver ID=00h~FEh, P1 = 00h ~ 3Fh : Pan Speed Command...
Page 89
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Pan Left Command Receiver Checksum & Tilt Down EV3000-D Response Description Receiver ID=00h~FEh, P1=00h~3Fh: Pan Speed ,P2 = 00h ~ 3Fh : Tilt Speed Command Receiver Checksum Right & Tilt...
Page 90
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Narrow Command Receiver Checksum field view EV3000-D camera 2 Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) Focus Command Receiver...
Page 91
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Clear Command Receiver P_ID Checksum Preset EV3000-D Response Description Receiver ID=00h~FEh, P_ID=00~7Fh,The Receiver Clears Current Pan, Tilt, Zoom, Focus Position of Camera 1 in EEPROM. Goto Command Receiver P_ID Checksum...
Page 92
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Turn on Command Receiver Checksum Wiper at Camera EV3000-D Response Description Receiver ID=00h~FEh, 0Bh of Byte 6=Wiper of Camera 2. Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2 and The Wiper of Camera 2 Will be Driven for Several Seconds.)
Page 93
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Menu Command Receiver Checksum selection left EV3000-D pressed Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) Menu Command Receiver Checksum...
Page 94
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Toggle Command Receiver Checksum e-zoom EV3000-D Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera(Clear Bit 6 of Byte3 to Select Camera 2.) Command Receiver Checksum position EV3000-D Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera(Clear Bit 6 of Byte3 to Select Camera 2.)
Page 95
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Command Receiver 00~02h Checksum auto/on/ EV3000-D Response Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) Byte 6 = 1 (It will set to continuous auto...
Page 96
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of Byte3 to Select Camera 2.) DC 12V IR power supply of Thermal camera Will be electrically Turned On by EV3000-D Receiver Without any command sending to thermal camera (default state).But...
Page 97
EV3000-D manual 2.Command List for Thermal camera (Basic format is PELCO D) : Internal Communication Commands between EV3000 D Receiver and Thermal camera(4 Bytes command response) Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Toggle Polarity Command Checksum Thermal Receiver...
Page 98
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Power state on Command Checksum Thermal Receiver camera Response Toggle palette Command Checksum Thermal Receiver camera Response Toggle Command Checksum sensitivity Thermal Receiver camera Response Toggle e-zoom Command Checksum Thermal...
Page 99
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Power state Command Checksum sleep Thermal Receiver camera Response Narrow field of Command Checksum view Thermal Receiver camera Response Wide field of Command Checksum view Thermal Receiver camera Response Focus...
Page 100
EV3000-D manual Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Adjust white Command 00~01h balance(M-G) Thermal Receiver camera Response Adjust gain Command 00~01h Thermal Receiver camera Response Adjust auto iris Command 00~01h level Thermal Receiver camera Response [Note for Byte 2] Byte 2 is EV3000 D receiver address which can be adjusted from "0~254".
EV3000-D manual 9. WARRANTY z Product Warranty MODEL No. EV3000-D SERIAL No. Date of purchased Place of Purchased If the product breaks down during proper use, it will be repaired within 1 year from the date of purchase free of charge Please contact us: Tel.
Page 103
Clean as required with nonabrasive household cleaner. A.3 Handling Use care to ensure that the EV3000-D is not excessively bumped or dropped. Even though the EV3000-D is a rugged instrument, it should be treated very carefully like any other sophisticated camera.
Page 104
EV3000-D manual Appendix B Glossary Atmospheric Attenuation – The amount of radiated IR energy that is absorbed by the atmosphere. It is a function of the temperature and humidity, particles in the air (i.e. fog, smoke, smog, etc.) and wavelength, among other factors.
Page 105
EV3000-D manual Instantaneous Field of View (IFOV) - A measure of the spatial resolution of an IR detector. It is defined as the angle seen by an individual pixel in the FPA and is measured in milliradians. Kelvin Temperature Scale - Absolute temperature scale related to the Celsius (or Centigrade) scale. 0°...
Page 106
EV3000-D manual RS232 - Serial communication standard using two wires – transmit and receive – and a common ground. Used for relatively short (<10 meter) cable runs. RS422 – Serial communication standard using four wires – a transmit differential pair and a receive differential pair.
Page 107
EV3000-D manual For repair/service, or Call Customer Service if problem(s) still +1-413-592-8477 exist after tech@unitedvisionsolutions.com troubleshooting To order additional Call sales Contact us items and/or 1-413-250-0903 accessories sales@unitedvisionsolutions.com info@unitedvisionsolutions.com For application support Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.