Related Manuals for Ametek Surgex SX1200 Series
Summary of Contents for Ametek Surgex SX1200 Series
- Page 1 SX1200 Series Electronic Systems Protection, Inc 8001 Knightdale Blvd. Suite 121 INSTALLATION INSTRUCTIONS Knightdale NC 27545 UM-SX1200-Rev-B surgex.com © 2019 AMETEK Electronic Systems Protection...
-
Page 2: Important Safety Instructions
WEEE) The symbol on the product or its packaging indicates that this product may not be treated as regular household waste. It should be returned to the retailer where the product was purchased or local collection systems should be used to ensure environmentally safe recycling. UM-SX1200-Rev-B surgex.com © 2019 AMETEK Electronic Systems Protection... -
Page 3: Installation Instructions
10 amps, but the Lamps can be used with the RLi but the dimmer must be set total load must not exceed the load specified in the above fully clockwise. UM-SX1200-Rev-B surgex.com © 2019 AMETEK Electronic Systems Protection... - Page 4 1 and 2. • Connect an applied DC voltage to pins 2 and 3. The positive must be connected to pin 2 and the negative must be connected to pin 3. UM-SX1200-Rev-B surgex.com © 2019 AMETEK Electronic Systems Protection...
- Page 5 SURGEX INTERNATIONAL PRODUCT SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT IN ACCORDANCE WITH THE TERMS AND CONDITIONS OF THIS LIMITED WARRANTY. IN NO EVENT WILL SURGEX BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. UM-SX1200-Rev-B surgex.com © 2019 AMETEK Electronic Systems Protection...