Advertisement
Installation continued
Fig.6
TOP-MOUNTING IN A CABINET
• Determine where in the top cabinet you want to install the rangehood, then drill 4 holes of
Ø4mm at the bottom of the hanging board of your cabinet (Fig. 7).
Fig.7
• Install the rangehood onto the bottom of the cupboard and secure it in place with four
ST4x30mm
screws (Fig 8).
• If there is a space between the wall and the rear of the rangehood, install the rear-underside
support mounting bracket (Part ID 2, Installation kit) using the two ST4x8mm screws.
WARNING: Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards!
Fig.8
450mm
9
30.5mm
215mm
Advertisement
