Fast & Fluid Management GA450 Manual page 14

Operator manual
Place the can
1. Put one or more cans (A) in the centre of the can table, or in
a pattern that has its gravitational centre in the middle of the
can table.
2. If the can plates are too close to each other, press the Stop/
Up key until you can place the can.
3. If you mix more than one can at the same time, make sure
that the can handles can not move. Use self-adhesive tape,
for example.
If you mix one can:
1. Retain the can handle with the provided elastic band.
GA450
WARNING
It is possible that the can is heavy. Use the
correct lifting tool when appropriate. Obey the
local regulations.
CAUTION
Make sure that all cans have the same height.
Do not stack cans upon each other.
Note
When the diameter of the can is > Ø39 cm,
remove the upper shield.
Note
When the diameter of the can is > Ø40.2 cm
and the height < 28 cm, use adapters.
1
3
B
A
14
V. 2.2
A A
2
A A
4
A A