Philips E Series User Manual page 8

2. Setting up the monitor
Install base stand
321E1SC
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(1) Gently attach the base to the base
column until the latch locks the
base.
(2) Use your fingers to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
(3) Use screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
3. After attaching the base, erect the
monitor with both hands on holding
the monitor together with styrofoam
firmly. Now you can pull out the
styrofoam. Notice this monitor is
curved design, when you pull out
the styrofoam, do not squeeze the
panel to avoid broken panel.
322E1C/325E1C/328E1C
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(1) Gently attach the base to the base
column until the latch locks the
base.
(2) Use screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
3. After attaching the base, erect the
monitor with both hands on holding
the monitor together with styrofoam
firmly. Now you can pull out the
styrofoam. Notice this monitor is
6