Related Manuals for made for movement NF-Walker 2
Summary of Contents for made for movement NF-Walker 2
- Page 1 User´s manual Orthopedic standing and walking brace system Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 1 of 56...
-
Page 2: Table Of Contents
Release the user from the brace ..................25 8.9. Transfer the user into the NF-Walker 2 – with a seat ............26 8.10. Transfer the user out of the NF-Walker 2 – With a seat ........... 28 Individual adjustments and aftercare ..................30 9.1. - Page 3 11.1 Data and dimensions for the NF-Walker 2 ................ 35 12. Extra equipment ........................36 12.1 Knee anti-overstretch ....................... 36 12.2 Lifting straps ........................37 12.3 Ring clamps ........................38 12.4 Abduction joint........................39 12.5 Dynamic knee stretcher ....................40 12.6...
-
Page 4: Introduction
Made for Movement, we make it our mission to offer opportunities for movement to people with restricted movement or who are only able to move on their own to a limited extent. NF-Walker 2 offers users with limited ability to stand or walk independently the opportunity of dynamic standing, walking and movement. -
Page 5: Warnings
NF-Walker 2 must only be used when the user is under the supervision of an adult, responsible person NF-Walker 2 is a personal helping aid and must not be used by persons for whom it has not been specially adjusted for ... - Page 6 Warnings – continued NF-Walker 2 is certified for both indoor and outdoor use No modification of this equipment is allowed. Modifications may lead to dangerous situations and product breakdown Do not fit other accessories to the product than what is described in this user’s manual chapter 12.
-
Page 7: Technical Description
Serial number: Each NF-Walker 2 is having its own unique serial number. This number is located at the back, under the rear frame. Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017... -
Page 8: Undercarriage (Chassis)
The undercarriage has an H-shape. The front axle (12) and rear axle (18) are connected by the main frame (10). When a user is using the NF-Walker 2, she/he will have one leg at each side of the main frame (10), between the front axle (12) and the rear axle (18). Having the main frame (10) between the user’s legs will prevent the user of crossing hers/his legs while using the NF-Walker 2. - Page 9 (10). Underneath the front axle (12), there is two rollers (11) for guidance of the guide straps/elastics. The front axle of the NF-Walker 2 can be delivered in two widths. The front axle frame part (13) is adjustable in length totally 110mm. The main frame (10) is the connection point for all forces picked up by the undercarriage and is connecting the different parts of the undercarriage together.
-
Page 10: Brace
(4). The hip plate (3) is equipped with a tongue (14) that can be connected to the undercarriages fix plate (please refer to chapter 5.1, pos. no. 1). Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017... - Page 11 The shoe-clip will ensure that the shoe is held in the correct position while the user is standing in the NF-Walker 2 and provide an easy way of getting the feet out of the brace-system when the use of NF-Walker 2 comes to an end.
-
Page 12: Adjustment Range
Adjustment range NF-Walker 2 These are typical measures of a user of the NF-Walker 2: Size Micro Distance 70cm user 85cm user Ankle - knee 14cm 22cm Knee - hip 13cm 22cm Ground - hip 35cm 45,5cm Hip width 15cm... -
Page 13: Guide Straps/Elastics
Some users are using guide elastics for walking and guide straps for stretching in a standing position. This gives the NF-Walker 2 a possibility to be both a walking aid and a dynamic standing frame. Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017... -
Page 14: Adjustment To A User
6. Adjustment to a user When a NF-Walker 2 is ordered to a new user, measures needs to be taken of the user in order to decide the correct size of the product, make initial adjustments and for choosing the correct components for the NF-Walker 2. -
Page 15: Fitting The Nf-Walker 2 To The User
Try out: The brace can now be put on to the user. Follow the description in chapter 8.5 – 8.8. The user is now in the NF-Walker 2. The spring force of the damper can be adjusted so the user will be given the best possible dynamic and movement. The user is now having weight bearing in the shoes, but the pressure from the shoes against the floor may be adjusted by increasing or decreasing the height of the column and/or the force of the damper. -
Page 16: How To Adjust
Tighten the lock nut (3) against the spring adjustment nut (2) after adjustment. 1 height adjustment screw 2 spring adjustment 3 lock nut Picture 8 Damper on NF-Walker 2 Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 16 of 56... -
Page 17: Height Of Column
Important: NF-Walker 2 must not be adjusted by persons not qualified to do so. Important: After adjusting the height of the column, please make sure that the column is not touching the floor when the suspension is fully compressed. -
Page 18: Using Nf-Walker 2
8.1. Duration of use The amount of time the user should use the NF-Walker 2, must be assessed on the basis of physical condition and state of health. The user’s therapist/doctor is responsible for assessing usage on a regular basis. -
Page 19: Getting The User Into The Nf-Walker 2 (Without Lifting Straps)
8.5. Getting the user into the NF-Walker 2 (without lifting straps) carriage and place it Remove the brace from the under on a mat or a bench. Open all the buckles. Lift the user into the brace. Picture no. 11 Remove the brace, open the buckles, lift the user into the brace Bend the users knee and support the users heel towards the bench or mat. - Page 20 Picture no. 17 Transfer the user into the undercarriage Close the lock at the column! Picture no. 18 Close the lock at the column Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 20 of 56...
- Page 21 Attach the elastics/straps at the front and back of the brace Picture no. 19 Attach the elastics/straps Release the brake. Picture no. 20 Release the brake Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 21 of 56...
-
Page 22: Getting The User Into The Nf-Walker 2 (With Lifting Straps)
8.6. Getting the user into the NF-Walker 2 (with lifting straps) Place the lifting straps at the inside of the chest belt and in front of the shoulders of the user. Fasten the lifting straps onto the spreader at the hoist Picture no. -
Page 23: How To Transfer The User Out Of The Nf-Walker 2
8.7. How to transfer the user out of the NF-Walker 2 Activate the brake. Picture no. 25 Activate the brake Release the elastics/straps at the front and back of the brace Picture no. 26 Release the elastics/straps Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017... -
Page 24: Without Lifting Straps
Picture no. 28 Lift the user off the undercarriage b. With lifting straps This sub-chapter presupposed that the NF-Walker 2 is equipped with lifting- straps. Attach the lifting straps to the hoist. Release the lock and the column and lift the user out of the undercarriage with the hoist. -
Page 25: Release The User From The Brace
Picture no. 32 Release the calf bows Release shoe-clips Roll the user to side and remove the brace. Picture no. 33 Release the shoes Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 25 of 56... -
Page 26: Transfer The User Into The Nf-Walker 2 - With A Seat
8.9. Transfer the user into the NF-Walker 2 – with a seat Activate the brake and open all buckles. Attach the seat as high as possible. Transfer the user onto the seat by lifting manually or by lifting with a hoist. Secure the chest belt. - Page 27 Picture no. 37 Remove the seat Release the brake. Picture no. 38 Release the brake Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 27 of 56...
-
Page 28: Transfer The User Out Of The Nf-Walker 2 - With A Seat
8.10. Transfer the user out of the NF-Walker 2 – With a seat Activate the brake. Picture no. 39 Activate the brake Loosen the Velcro on the shoes Picture no. 40 Loosen the shoes Loosen the elastics/straps at the front and... - Page 29 It’s important for the assistant to bend the knees and use the large muscle groups while lifting the user. Picture no. 43 Lift the user off the seat Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 29 of 56...
-
Page 30: Individual Adjustments And Aftercare
9.1. Individual adjusting NF-Walker 2 is a personal aid, and must only be used by the person for whom it has been specially adjusted to. NF-Walker 2 must only be adjusted by consultants from Made for Movement or its representatives. -
Page 31: Transport
Transport NF-Walker 2 can be disassembled for easier packing/transport without affecting the settings. Disassembling/assembling of the front axle, rear axle and column requires 1 pcs. Unbraco 4mm key 1 pcs. Torx key size 30 Front axle: Loosen the four Unbraco-screws at the front axle ... - Page 32 Remove the screws and the clamp Disassemble the rear axle Picture no. 45 Loosen the Unbraco screws at the rear axle Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 32 of 56...
- Page 33 Pull the column out of the frame Loosen these screws at both sides of the frame Picture no. 46 Loosen the Torx screws at the frame Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 33 of 56...
-
Page 34: Assembling
Tighten the 6 screws, 3 at each side of the frame securely, using a Torx key no. 30 Picture no. 47 Complete assembled undercarriage Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 34 of 56... -
Page 35: Technical Information
10,9 kg Weight (Size S) 12,4 kg Picture no. 48 NF-Walker 2 Complete (shown without hip belt, chest belt and the guide straps/elastics) Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 35 of 56... -
Page 36: Extra Equipment
The following chapter will give you an overview over the available extra equipment for NF- Walker 2. The extra equipment can only be assembled to the NF-Walker 2 by Made for Movement or its representatives. There are adjustments and security-routines involved with all of the extra equipment that have to be performed by our trained technicians. -
Page 37: Lifting Straps
3) and connect the brace to the undercarriage. Please remember to secure the fix plate and put on the guide straps/elastic before disconnecting the spreader. The lifting straps fits all sizes of NF-Walker 2 Picture no. 51 Lifting straps (pair) Picture no. -
Page 38: Ring Clamps
In these cases, the ring clamp can be used. The clamp will fit onto the brace and can be adjusted to the height the user needs. The ring clamps are available for all sizes of NF-Walker 2 Picture no. 53 Ring clamp Picture no. -
Page 39: Abduction Joint
The abduction joint can also be set to allow the user to freely move her/his legs within the adjustment range of 12°. The abduction joints are available for all sizes of NF-Walker 2 Set-screw Set-screw Picture no. -
Page 40: Dynamic Knee Stretcher
The original knee joints at the brace will be replaced by the dynamic knee stretchers and adjusted to the user. The dynamic knee stretcher is only available for NF-Walker 2 size S Picture no. 57 Knee stretcher MFM part name MFM part no. -
Page 41: Brace Rotation System
There is needed at least 30mm distance between the hip joint and knee joint to make room for the brace rotation system The brace rotation system is only available for NF-Walker 2 size S Picture no. 58 Brace rotation system Picture no. -
Page 42: Head-Support
A head-support can be assembled onto the head- support plate, ensuring comfort and safety for the user The head-support parts fit all sizes of NF-Walker 2. The head support bow can be bent to fit the user’s anatomy if necessary. -
Page 43: Side Bars
12.8 Side bars Side bars can be assembled to the brace. This gives the user of the NF-Walker 2 a secure place to hold on to while using the NF-Walker 2 and is an alternative to the use of support-handle in front of the user. -
Page 44: Guide Bars 70 And 90 Cm
The guide bars are available in two lengths: 70 and 90cm. The guide bars fit all sizes of NF-Walker 2 Picture no. 64 Guide bar 70cm Picture no. 65 Guide bar 90cm MFM part name MFM part no. -
Page 45: Seat
If the seat should slide down during use, the rear handle must be tightened harder after moving the seat. The seat fit all sizes of NF-Walker 2, but it requires some free space at the column. Axles... -
Page 46: Steering
The steering must be completed with a support handle (please see chapter 12.15). The steering fits all sizes of NF-Walker 2. N.B. the minimum width of the front axle at the steering is the same width as NF-Walker 2 size S is using. -
Page 47: Table
12.12 Table A table can be delivered to your NF-Walker 2. The table can be used both as a table-top and for support for the under-arms and hands while using the NF-Walker 2. The table can be adjusted in angle between the table-top and column underneath the table by moving the position of the bracket. -
Page 48: Removable Handle And Table Bracket
12.13 Removable handle and table bracket In order to assemble a support handle or a table to your NF-Walker 2, an universal bracket must be installed on the front axle frame part (chapter 5.1 – pos no. 13) 1 Handle screw... -
Page 49: Escort Handle
A bracket is assembled onto the column of the undercarriage. The escort handle fits into the rear of this bracket and can be secured in place by tightening the handle screw. The escort handle fits all sizes of NF-Walker 2. Escort handle... -
Page 50: Support Handle
(chapter 12.13) or steering (chapter 12.11). The support handle will be cut in length if needed to fit for the actual user. The support handles fit all sizes of NF-Walker 2. Picture no. 72 Support handle 310mm Picture no. 73 Support handle 410mm MFM part name MFM part no. -
Page 51: Tests And Approvals For Nf-Walker 2
Cleaning and maintenance Cleaning NF-Walker 2 should be cleaned using a cloth dampened in mild soapy water. Do not use high- pressure washers or other "aggressive" cleaning methods. The same applies to straps and padding. If NF-Walker 2 is transported outdoors, any sand and dirt should be brushed off or cleaned. -
Page 52: Maintenance
Made for Movement or its representatives. Periodic Maintenance: Made for Movement develops and produces unique standing, training and walking aids for disabled persons. These products are designed with moving parts to enable smooth operation, and easy and safe use. Some of the moving parts and other key components will get worn down during use, as these are parts that needs replacing when worn out. -
Page 53: Reuse
Reuse NF-Walker 2 may be reused of a new user after a period of use. The product will have to be delivered to Made for Movement or its representative. A reuse-service will be performed where worn parts will be replaced. -
Page 54: Declaration Of Conformity
Declaration of conformity Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 54 of 56... -
Page 55: Version: User's Manual En Nf-Walker 2 Ver. 2.0
Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 55 of 56... - Page 56 3735 Skien Norway Tel. +47 35 50 51 20 Fax +47 35 50 51 21 info.no@madeformovement.com www.madeformovement.com BRN: NO 991 237 615 VAT Version: User’s manual EN NF-Walker 2 ver. 2.0 Date for this version: 09.02.2017 Page 56 of 56...