Table of Contents
Advertisement
Taking a photo
You can take photos in various modes. The camera
produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
1. Access the Camera menu or press and hold [
to turn on the camera.
2. Adjust the image to be captured.
•
Press <
> to access camera options.
next section
•
Use the keypad to change the camera settings
or switch to other modes.
3. Press [
] to take a photo. The photo is saved in
the Photos folder.
4. To
access photo options
delete the photo
return to Capture mode
]
p. 54
Press
<Options>.
p. 55
[C] and then <Yes>.
<Preview>.
Using camera options in Capture mode
In Capture mode, press <
options:
•
Record video: switch to Record mode.
•
Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi-shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
•
Effects: change the colour tone or apply a special
effect.
•
Frames: apply a decorative frame.
•
Timer: set a time delay before the camera takes a
photo.
•
Go to photos: access the Photos folder.
> to access the following
53
Advertisement
Table of Contents
