Table of Contents
Advertisement
USING YOUR APPLIANCE
8.
To record on the tape's reverse side,
press the STOP/EJ button twice and
open the door. Take out the tape and
insert it with the reversed side up,
close the door and press the record
button to resume.
9.
You can erase a recording by
beginning a new recording on the
same tape.
TROUBLESHOOTING
Problem
The tape player will not
turn on.
The tape player will not
record.
The device will play even
though the PLAY button
has been pressed.
CLEANING & MAINTENANCE
1.
Always disconnect the equipment
from the power supply before
cleaning.
2.
Clean the equipment with a soft,
damp, lint free cloth.
3.
Do not use abrasives or harsh
cleaners.
8
10. To listen to your recording, use the
Possible Cause
Make sure the device is plugged into the mains or that the
batteries are properly installed. Then turn on the device.
Make sure the device is powered on.
Check to see if a tape is inside the cassette player & that the
record button has been pressed.
If using an external MIC/device to record, make sure it has not
been disconnected.
The device will automatically shut off when the tape comes
to an end. To continue reverse the tape or rewind it to begin
playback.
buttons to control playback.
Advertisement
Table of Contents
