Connections; Power Panel; Power Plug; Main Power Switch - Accademia Laboratory Niko 1300M User Manual

fig 3.1
B
A
www.accademialab.com

CONNECTIONS

Power panel

CAUTION
RISK OF ELECTRIC SHOCK
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED PERSONNEL.
TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER OR BACK.
Powercon 32A
In the rear panel is fitted a Neutrik (R) Powercon 32A
[fig 3.1D] whom provide the main power to the
amplifier.
Only connect the Niko1300M to mains
power supplies with a ground conductor.
Circuit braker
The circuit fracker [fig 3.1C] of the Niko1300M is
located in the power panel section of the rear
panel.This special circuit breaker is a fuse-less bracket
that operate only with the magnetic principle.
• OFF: the Niko1300M is isolated from that mains
power. Never turn off the circuit breaker before
wait 10 second from the standby
• ON: the Niko1300M check the system before
entering the standby mode. (2 second)
Usb update
This UPDATE USB port [fig 3.1A] is only for update
and technical interventions by authorized people only.
Trigger
This minijack I/O [fig 3.1B] connection is designed for
future scope.
10 of 15
C D
Rel: 1/8/2018 V1 RevA