Priority Order; Ripping; Add Storage To Roon - Trigon Elektronik EXXCEED Server User Manual

6.1.1 Priority Order

1. USB medium with the name RIPP
(Note: On the PC, you can give each USB storage medium (USB stick, USB hard disk) an
individual name. In order for the EXXCEED Server to select this USB medium as the first
storage medium, you must give this medium the name "RIPP").
If no medium with the name RIPP is connected to the USB sockets, proceed as follows:
2. storage medium in Slot 1
3. storage medium in Slot 2
4. internal storage EXXCEED (SSD)
7

ripping

To rip a CD, simply insert the CD into the drive slot and the ripping process will start automatically.
Depending on the amount of data, the ripping process takes a few minutes. When the ripping is
finished, the CD will be ejected automatically and the data will be stored in the
If you want to cancel the ripping process, tap the "OPEN" button to the left of the drive slot. The
operation will be aborted and the CD will be ejected.
Note: If the CD is not ripped
Eject CD (long press on OPEN), clean CD and insert again.
8

Add storage to roon

In order to be able to use further memories (hard disks, USB sticks, etc.), these memories must be
roon
registered in the
on your tablet.
In the window that opens on the left side of the screen, find the entry "Settings" and tap on it.
Select "Storage locations" from the menu.
The following screen opens:
(Please note that the content will look slightly different than in the example below, depending on
which storage media you are already logged in to and their names.)
software. Tap on this symbol (MENU) in the upper left corner of the screen
11
roon
database.