Download Print this page

Remote Control; Important Notes - Akai SS047A-381 Instruction Manual

2.0 channel hi-fi active speakers

Advertisement

REAR PANEL - CONTROLS AND FUNCTIONS

REMOTE CONTROL

1.
Power standby
2.
FM mode, short press the button up can search for radio station manually. Long press button up can look for
radio station automatically and this function would stop until the radio station was found out.
3.
USB/Bluetooth mode to realize the function of play and pause. Under the FM mode, short press the button can
search and save the radio station automatically. Long press the button can delete the current radio channel (it
can only delete the radio stations which were saved before).
4.
USB/Bluetooth mode to realize the last song function. Under the FM mode, short press the button can choose
the last radio channel. Long press the button can save the current station to the previous channel.
5.
FM mode, short press the button down can search for radio station manually. Long press button down can look
for radio station automatically and this function would stop until the radio station was found out.
6.
Under the USB and Bluetooth mode, it can choose 6 kinds of EQ mode circularly.
7.
Volume decrease
8.
Output suspension
9.
Input selection
10. USB/Bluetooth mode to realize the next song function. Under the FM mode, short press the button can choose
the next radio channel. Long press the button can save the current station to the next channel.
11. Turn off the EQ mode.
12. Volume increase
Note: because the Infrared emitting is at the top of the back of remote control, so it is not correct when you operate
the remote control direction straight to match the speaker. The correct operation is to keep the remote control and
Infrared emitting of the speaker about the Angle of 45 degree -90 degree.

IMPORTANT NOTES

Make sure the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or unplugging
from an outlet.
Ensure that the main power switch is in the "OFF" position before connecting the AC power cord to the power supply to avoid damage
to the unit.
A damaged power cord can easily cause an electric shock or fire hazard; Never use a power cord after it has been damaged.
1.
FM antenna
2.
Right audio input
3.
Left audio input
4.
Power on/off switch
5.
AC Power cord
6.
Speaker output

Advertisement

loading