Advertisement
Figure 2. MTII4200-H-A-D-x-x-H-xxx/xxx Bent Bottom Left Hand Angled Assembly
2. PRODUCT DESCRIPTION
The MTII4200 liquid level sensor is a multifunctional transmitter with 4-20 mA loop and HART. It provides an analog
output of level and the HART digital protocol. Outputs can be monitored using 4-20 mA signal output, a HART device
(hand-held or PC-compatible software), the integral display, or all of the above. The MTII4200 transmitters are available
in a single cavity explosion-proof enclosure.
2.1 MTII4200 Transmitter Specifications
16633 Foltz Industrial Parkway | Strongsville, OH 44149 | Telephone +1 (440) 572-1500 Facsimile: +1 (440)-238-8828
PARAMETER
LEVEL OUTPUT
Measured Variable:
Full Range:
Non-linearity:
Repeatability:
Sensor Operating Temperature:
GAUGE LOOP
Input Voltage Range:
Reverse Polarity Protection:
Series diodes
Transient Protection:
CALIBRATION
Zero Adjust Range:
Span Adjust Range:
The Clark Reliance Corporation
Email:
sales@clark-reliance.com
MAX. ACTIVE SENSING LENGTH
SPECIFICATIONS
Liquid level, interface level
Output:
4-20 mA, HART
12 to 228 in. (46 to 579 cm) for mounting style S
12 to 144 in. (46 to 365 cm) for mounting style H
0.020% F.S. (Independent BSL) or 1/32 in. (0.794 mm)*
0.005% F.S. or 0.005 in. (0.127 mm)*
-40 to 300°F (-40 to 149°C) Ambient
10.5 to 36 VDC
Stage 1: line-to-ground surge suppressors; 2500 Amps
peak (8/20 µsec.)
Stage 2: line-to-line and line-to-ground transient
suppressors; 1500 Watts peak (10/1000 µsec.)
Anywhere within the active length
Full Scale 0 .5 ft. (152 mm) from zero
| Web Site:
www.clark-reliance.com
(3.500)
DETERMIND BY SE
POSITION AT ASSEMBLY
Advertisement
