DirecTV Cinema Connection Kit User Manual page 9

D. When the connection is complete, the WlAN lED displays solid green.
You have successfully completed the WPS connection between the DCCK
and your Wi-Fi router. You should now proceed to the next section
to connect the DCCK device to your receiver.
If the WlAN lED does not light up, then repeat Steps C and D. If the
WlAN lED still does not light up, then proceed to the next section
and you will have the option to manually configure the wireless connection
when you reach the "Manual Wireless Setup" section on page 23.
IMPORTANT: There are three different options for connecting your DCCK device to your receiver, depending
on the DIRECTV installation in your home. To properly install your DCCK device, carefully follow
the steps in the "Determine Your Connection Type" section (see page 10).
lED is solid green
connection
9