Jung DALI 240 PDPE Operation Manual
Jung DALI 240 PDPE Operation Manual

Jung DALI 240 PDPE Operation Manual

Power potentiometer insert

Advertisement

Quick Links

Power DALI potentiometer insert
Power DALI potentiometer insert
Art.-No.: 240 PDPE
Operationsmanual

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
These instructions are an integral part of the product, and must remain with the end
customer.

2 Device components

(1) DALI potentiometer
(2) Frame
(3) Central plate
(4) Control knob
(5) Screw terminals

3 Function

Intended purpose
-
Brightness setting for luminaires with DALI interface
-
Installation in appliance box to DIN 49073
-
Observe the technical data.
Product characteristics
-
If mains voltage is connected to the device "= active operation", it supplies the control
current for 26 DALI subscribers.
-
If no mains voltage is connected "= passive operation", then the device is powered using
the DALI voltage and serves as an additional control section.
-
Parallel switching of up to four "active" DALI potentiometers with the option of supplying up
to 104 DALI subscribers.
-
All the control sections have the same functionality.
-
Saving of a basic brightness and a fixed switch-on brightness.
82563213
J:0082563213
picture 1
1/4
06.05.2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DALI 240 PDPE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jung DALI 240 PDPE

  • Page 1: Safety Instructions

    Power DALI potentiometer insert Power DALI potentiometer insert Art.-No.: 240 PDPE Operationsmanual 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to the device and result in fire and other hazards.
  • Page 2 Power DALI potentiometer insert i To ensure fault-free operation, do not combine the device with other DALI controllers. Behaviour after a mains voltage failure When the mains voltage returns, the lighting is switched to that switching state in which it was located before the mains voltage failed.
  • Page 3 Power DALI potentiometer insert Connecting and mounting the device picture 2 (1) DALI potentiometer "Active mode" (6) DALI subscriber e. g. DALI electrical ballast (7) DALI potentiometer without connection of mains voltage "Passive mode" Connect the DALI potentiometer and DALI electrical ballast according to the wiring example (picture 2).
  • Page 4: Technical Data

    We provide a warranty as provided for by law. Please send the unit postage-free with a description of the defect to our central customer service office: ALBRECHT JUNG GMBH & CO. KG Service Center Kupferstr. 17-19 D-44532 Lünen Service-Line: +49 (0) 23 55 .

Table of Contents