Assembling The Pedestal - Panasonic TY-ST42PX500 Installation Instructions Manual

Assembling & setting up the pedestal
Points to note during installation
• Insert the mains plug into a mains socket which is close and easily accessible for the plasma television.
• Provide adequate ventilation so that the temperature around the television does not rise above 40°C (104 °F).
If there is insufficient movement of the air inside the display, heat may build up inside the television and fire
may result.
1) Fit the 37- and 42-inch plasma displays to the TY-ST42PX500, and the 50-inch plasma display to the TY-ST50PX500.
2) The illustrations show the TY-ST42PX500. The TY-ST50PX500 is not shown as it is similar in appearance.
Accessories for pedestal assembly
Short screw
...................4

Assembling the pedestal

Using the four short screws
For 42'', 50'' plasma television
Align the stamped marks.
Pole
B
( )
Front
For 37'' plasma television
Align the stamped marks.
Pole
A
( )
Front
8
Long screw Pole...........2
...................4
B
, securely fasten the left and right poles to the base, as shown in the illustration below.
Pole
Base ...........1
A
For 42'', 50'' plasma television
Short
Pole
screws
For 37'' plasma television
Band .........2
Align the stamped marks.
Pole
(
Front
Align the stamped marks.
Pole
(
Front
A
)
B
)