Philips SalonStraight Pro XL User Manual page 7

- For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
- Keep the appliance out of the reach of children.
- The straightening plates and the plastic parts near the plates reach a
high temperature quickly. Prevent the hot surfaces of the appliance
from coming into contact with your skin.
- Only use the appliance on dry or damp hair.
- Do not leave the plates in your hair for more than a few seconds at a
time as this may cause damage to your hair.
- Keep the appliance away from non-heat-resistant surfaces and never
cover the appliance with anything (e.g. towel or clothing) when it is
hot.
- For safety reasons, the straightener automatically switches off after
having been on for 1 hour.
- Always unplug the appliance after use.
- Do not wind the mains cord round the appliance.
- Wait until the appliance has cooled down before you store it.
- Keep the straightening plates clean and free of dust, dirt and styling
products such as mousse, spray and gel. Dust, dirt and styling
products may cause damage to the ceramic-coated straightening
plates.
- Always return the appliance to a service centre authorised by Philips
for examination or repair. Repair by unqualified people could cause
an extremely hazardous situation for the user.
- The plates have a ceramic coating. This coating slowly wears away
over time. This does not affect the performance of the appliance.
- If you use the appliance on colour-treated hair, the straightening plates
may stain.
- The maximum temperature occurs just after heating up. The actual
temperature during use may be lower.
- Keep the appliance away from flammable items.
EnglisH
7