4k 18gbps 1x8 hdmi splitter with auto-scaling and poc (12 pages)
Summary of Contents for ANTIFERENCE HDMI0104SV3
Page 1
HDMI0104SV3 1 to 4 4K HDMI splitter with auto scaling, EDID control & HDCP 2.2 User Guide...
Page 2
Introduction This Antiference HDMI 2.0 HDR device splits a single 4K/1080p HDMI source to 4 points/displays over HDMI cables. The product features an auto scaling function allowing a combination of UHD & HD TV sets to be connected. The...
Package contents HDMI0104SV3 1 to 4 4K HDMI splitter with auto scaling, EDID control & HDCP 2.2 User Guide Installation Requirement 1. HDMI source device (SKY Q/HD, Blu Ray, PS3, Apple TV, CCTV etc) 2. HDMI display device(s) such as HDTV or projector with HDMI port.
Page 4
Installation 1. Connections 1. Connect the HDMI video source device output port to the splitter input port via an HDMI cable 2. Connect the splitter output port to the HDMI display (TV) via HDMI cable 3. Power on the splitter (Power indicator led will light up)
Page 5
2. Operation 1. Before the HDMI signal outputs, the splitter will read the EDID information of the connected TVs and send it back to HDMI source. 2. This process determines the output mode/resolution. 3. Indicator led shows the working status 4.
Page 6
Q: No audio or video displayed Check the power supply to make sure the power light is on. 2 ) Ensure all the HDMI cables connected properly. 3 ) Check and make sure the correct HDMI input is selected on the TV. 4 ) If using a laptop, ensure the output setting is activated and display setting is duplicated or extended desktop 1 ) Check and make sure all connections are good and correct.
For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product. A full declaration document can be found on our website www.antiference.co.uk www.antiference.co.uk...
Need help?
Do you have a question about the HDMI0104SV3 and is the answer not in the manual?
Questions and answers