The Usb Hdd Device Cannot Be Registered - Sony Bravia KD-49XF9005 Help Manual

Help Guide
Perform [HDD performance check] to check that the USB HDD's specifications meet
the requirements.
Press the HOME button, then select [Settings] — [Recording device setup] — [HDD
performance check].
Related topics
Information about using a USB HDD device for recording (USB HDD recording
models only)
[190] Troubleshooting | USB HDD recording (USB HDD recording models only)
The USB HDD device cannot be registered. (USB
HDD recording models only)
Check if the USB HDD device is connected to the USB3 port (blue) indicated as "HDD
REC" .
If the USB HDD device is properly connected to the blue USB3 port , register it for
recording again because it is already registered as a device for purposes other than
recording (such as storage).
Note
If there are devices connected to the USB1 and USB2 ports, temporarily remove
them for this procedure.
1
Press the HOME button, then select [Settings] — [Storage & reset].
2
From [Device storage], select the USB HDD device you want to register for
recording.
3 Select [Register for recording].
4
Follow the on-screen instructions to register the USB HDD device to the TV.
Use [HDD performance check] to check if the USB HDD device specifications meet the
requirements.
143 z 147