1. Manuals
  2. Brands
  3. Stoelting Manuals
  4. Ice Cream Maker
  5. AUTOVEND
  6. Operator's manual

Stoelting AUTOVEND Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model AUTOVEND
OPERATORS MANUAL
Manual No. 513698
Rev.1

Advertisement

Table of Contents
loading

Related Manuals for Stoelting AUTOVEND

Summary of Contents for Stoelting AUTOVEND

  • Page 1 Model AUTOVEND OPERATORS MANUAL Manual No. 513698 Rev.1...
  • Page 3 DO NOT ATTEMPT to operate the machine until instructions and safety precautions in this manual are read completely and are thoroughly understood. If problems develop or questions arise in connection with installation, operation, or servicing of the machine, contact Stoelting. Stoelting Foodservice Equipment Customer Service: 888.429.5920...
  • Page 4 CAUTION If you need to replace a part, use genuine Stoelting The signal word “CAUTION” indicates a potentially parts with the correct part number or an equivalent hazardous situation, which, if not avoided, may result part.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Section Description Page Description and Specifi cations Description ....................1 Specifi cations ..................... 2 Initial Set-Up and Operation Operator’s Safety Precautions ..............3 Operating Controls and Indicators .............. 3 Emptying the Freezing Cylinder ..............5 Disassembly of Machine Parts ..............6 Cleaning Disassembled Parts ..............

  • Page 7: Description

    SECTION 1 INTRODUCTION 1.1 DESCRIPTION The Stoelting AUTOVEND machine is a self contained frozen treat vending machine. The machine takes cash or credit cards and serves two different fl avors or a twist along with up to four different toppings.

  • Page 8: Specifi Cations

    Air cooled units require 6” (15,2 cm) air space on both sides Hopper Volume Two - 3 gallon (11,35 liters) Freezing Cylinder Two - 0.85 gallon (3,22 liters) Volume Topping Bin Four - 9 quart (8,6 liters) Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 9: Initial Set-Up And Operation

    Spoon Dispenser Card Swipe Reader Card Swipe Reader Dispensing Carousel Dispensing Carousel Coin Slot Coin Slot Pop-Out T-Handle Lock Pop-Out T-Handle Lock Bill Acceptor Bill Acceptor Change Dispenser Change Dispenser Figure 2-1 Machine Controls Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...
  • Page 10 The carousel remains open until it senses the cup has been removed. The CLEAN button initiates “Clean Mode”. Arrow Buttons () The arrow buttons are used by technicians to navigate through the control readings and settings. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 11: Emptying The Freezing Cylinder

    “Down” buttons on displayed, then the main power is on. the vending interface to close the spigots. Fill the hopper with 2 gallons (8 liters) of cool tap water. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 12: Disassembly Of Machine Parts

    Main Freezer Power button for three seconds to Keep the rear of the augers tipped up once they turn the power off. are clear of the freezing cylinder to prevent the rear seal assemblies from dropping. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...
  • Page 13 Drip Tray Drip Tray Topping Overflow Topping Overflow Push Back to Disengage Pins Push Back to Disengage Pins Figure 2-12 Disengage Topping Bin Pins Figure 2-15 Trays Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 14: Cleaning Disassembled Parts

    fi ed for this use. Use lubricants only in accordance with the manufacturer’s instructions. Install the cup holder and shield. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 15: Sanitizing

    The United States Department of Agriculture and the augers engage the drive shafts. the Food and Drug Administration require that all cleaning and sanitizing solutions used with food processing equipment be certifi ed for this use. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 16: Freeze Down And Operation

    On the vending interface, press and hold the screen in the upper left corner until a passcode screen is displayed. NOTE The passcode screen may already be displayed after pulling out the door safety switch Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 17: Maintenance And Adjustments

    fl oat value. Add coins or Belt life will be increased if new drive belts are press Skip. tightened after two or three weeks of operation. Press the Finish button. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 18: Bill Acceptor

    Carousel Door - Remove any spilled toppings and wipe clean. Mix Hopper - Remove any foam accumulation in the hoppers. Mix Inlet Regulator - Some products may require the mix inlet regulator be removed and cleaned. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 19: Troubleshooting

    MIX LEVELS turn the cylinder back on. If the error persists, Make sure the hoppers are at least 3/4 full of liquid mix. contact your Authorized Stoelting Distributor for Add mix if necessary. further assistance. CAROUSEL DOOR...
  • Page 20 On/Off button for the cylinder to turn to turn if off then back on. If the error persists, if off then back on. If the error persists, contact contact your Authorized Stoelting Distributor for your Authorized Stoelting Distributor for further further assistance assistance.

  • Page 21: Troubleshooting Machine

    3 Chipped or worn spigot o-rings. 3 Replace o-rings. Front door leaks. 4 O-rings or spigot installed wrong. 4 Remove spigot and check o-ring. 5 Inner spigot hole in front door nicked 5 Replace front door. or scratched. Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...
  • Page 22 Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 23: Replacement Parts

    324672 Decal - Not Packing Material 324686 Decal - Danger Automatic Start 324803 Decal - Domed Stoelting Logo (Large) (Header Panel) 508048 Lubricant - Spline (2 oz Squeeze Tube) 508135 Petrol Gel - 4 oz Tube Owner’s Manual #513698 Rev.1...

  • Page 24: Auger Shaft And Faceplate Parts

    Seal - Rear Auger - Black 694255 Spring - Auger Flight 2177428 Door w/Pins 2204095 Spigot Body - Outer 2204096 Spigot Body - Center 2204242 Pin - Spigot 2205440 Support - Front Auger 4157968 Auger Shaft Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

  • Page 25: Trays, Bins & Hopper Parts

    Topping Bin - Right 230038 Topping Bin - Left w/Agitator 314453 Cover - Hopper 624677 O-Ring - Mix Inlet Regulator 744614 Tray - Drain 2203352 Mix Inlet Regulator 2205992 Cover - Cup Tubes Owner’s Manual #513698 Rev.1 AUTOVEND Model Machines...

Table of Contents