Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for First Solar 6 Series
Summary of Contents for First Solar 6 Series
- Page 1 Global REV 2.1 First Solar Series 6™ Module | USER GUIDE PD-5-200-06...
- Page 2 However, no responsibility is assumed by First Solar or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of First Solar or its subsidiaries.
-
Page 3: Table Of Contents
7.10 INVERTER COMPATIBILITY 7.11 GROUNDING METHOD 8 MAINTENANCE 8.1 MAINTENANCE 8.2 MODULE CLEANING GUIDANCE 8.3 MODULE DISPOSAL 9 REVISION HISTORY © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide ii of ii... -
Page 4: Introduction
INTRODUCTION This document provides information on First Solar Series 6 Modules of model types FS-6XXX and FS- 6XXXA (“XXX” references the module power rating) for system designers, installers, and maintenance personnel. Model types FS-6XXXA contain an anti-reflective coating (ARC) on the front side surface. Series 6 Modules are designed to have a long operating life and high energy yield when installed, operated, and serviced in accordance with the instructions in this User Guide. -
Page 5: Safety
All instructions and safety information should be read and understood before attempting to handle, install, or electrically connect First Solar modules. Failure to follow safety, installation, and handling instructions may result in injury. Only qualified personnel should install, operate, or maintain PV modules or systems. - Page 6 DANGER Reverse currents higher than the rated values for a First Solar module, may result in module failure, including module breakage due to RCOL. Extreme and continuous RCOL conditions may cause a fire or create electrical shock hazards. To avoid RCOL: Maintain equivalent voltage in parallel strings by installing an equal number of modules per string within the same source circuit.
-
Page 7: Regulatory Compliance
REGULATORY COMPLIANCE It is the responsibility of the installer and/or system integrator to ensure compliance with all local structural and electrical codes, which may be applicable to the installation and use of First Solar Series 6 Modules. For systems installed in Canada, installation shall be in accordance with CSA C22.1, Safety Standard for Electrical Installations, Canadian Electrical Code, Part 1. -
Page 8: Product Identification & Ratings
As received and stabilized ratings at STC (1000W/m², AM 1.5 25°C Cell Temperature) ±10% Measurement uncertainty applies 1000V Listed for UL Canada © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 5 of 21... -
Page 9: System Derating Factors
, AM 1.5 spectrum, and cell temperature of 75°C, multiply the specific model type STC listed Isc value by a factor of 1.275. © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide... -
Page 10: Handling & Storage
Do not attempt to lift multiple modules off the stack at the same time. Figure 1: Example Series 6 Module Pack © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 7 of 21... -
Page 11: Mechanical Specifications
PAGE 1 OF 3 Module frames may be configured with either a single or dual cross brace design as shown in Figure 2. © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide... - Page 12 END CROSS BRACE 2.8mm 35mm 41mm 49mm 8.5mm EDGE FRAME SLOTTED HOLE THRU ALL LAMINATE END CROSS BRACE 9.4mm 30mm © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 9 of 21...
-
Page 13: Installation & Mounting
First Solar is not responsible for bonding failure, breakage, damage, wear, corrosion, or module performance issues that are deemed to be caused by design or installation practices that do not comply with this User Guide. -
Page 14: Mounting Locations & Load Ratings
Minor clamp deformation under load may be acceptable as long as clamping force requirements are maintained and the deformation does not contribute to a weakening of the clamp or dislodgement of the module. © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 11 of 21... -
Page 15: Top Mounting
SCALE 1 : 1 PRD-034-A 12 PLACES SCL 1:12 37.0 kg SHT 2 OF 3 THIRD ANGLE PROJECTION PRINTED ON: 12/18/2017 © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 12 of 21... -
Page 16: Speedslot Mounting
END CROSS BRACE 2.8mm EDGE FRAME END CROSS BRACE 2.8mm 8.5mm 8.5mm PAGE 3 OF 3 PAGE 3 OF 3 © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 13 of 21... -
Page 17: Module Orientation
Cleaning robots or other mechanisms that traverse the module while the system is operating • Row-to-row shading when the modules are installed in landscape orientation © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 14 of 21... -
Page 18: Installation Considerations For Arc Modules
Series 6 Modules use Staubli produced (http://ec.staubli.com) MC4-EVO 2 connectors (PV-KST-EVO2/ PV-KBT-EVO2). Module-to-module and module-to-harness interconnection is advised to be done between same manufacturer and type of connectors. First Solar cannot guarantee that different connector types will be compatible in every connection instance. -
Page 19: 7.10 Inverter Compatibility
MPP voltage remains within the MPP window for expected operating conditions. © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide... -
Page 20: 7.11 Grounding Method
NFPA 70: National Electrical Code, article 250. First Solar recommends Series 6 Modules be used in negative-grounded systems. Series 6 Modules must not be subjected to negative voltage bias conditions that can occur in floating or bi-polar systems (subjecting modules to conditions that could drive potential induced degradation). -
Page 21: Maintenance
Snow may be cleared from the modules by using the Dry Cleaning Guidelines (Table 5). © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 18 of 21... -
Page 22: Module Cleaning Guidance
MODULE CLEANING GUIDANCE In most climates, First Solar modules do not require cleaning. Installed modules may collect a light layer of dust and/or dirt (soiling) over time and periodic rainfall should be sufficient to remove light soiling in most cases. If cleaning is performed to maximize system performance, please follow the below guidelines. -
Page 23: Module Disposal
Modules may be recycled or disposed of in accordance with applicable local requirements. Please visit www.firstsolar.com/modules/recycling for further details on the recycling program. © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 20 of 21... -
Page 24: Revision History
Added single and dual crossbar frame designs; Updated UL grounding information, added system derating information, 2/15/2019 updated Handling and Storage section. Added SpeedSlot nomenclature. © 2019 First Solar, Inc. | PD-5-200-06 Rev 2.1 | First Solar Series 6 Module User Guide 21 of 21... - Page 25 © 2019 First Solar, Inc. | PD-5-200-06 Version 2.1 | First Solar Series 6 Module User Guide...
Need help?
Do you have a question about the 6 Series and is the answer not in the manual?
Questions and answers