KidKraft 26913A Assembly Instructions

Please retain this information for future reference
© 2010 KidKraft, LP
HARDWARE

PARTS LIST:

A. Hex Screw
x 32 pcs
(50 mm, 2 in)
B. Cam Bolt
x 4 pcs 1
x 2
(36 mm, 1 3/8 in)
C. Cam Lock
x 4 pcs
3
D. Cross Dowel
Bolt x 4 pcs
(58 mm, 2 1/4 in)
E. Cross Dowel
Nut x 4 pcs
6
Allen Wrench
x 1 pc
The following tool
is required for
assembly:
8
R
Phillips Screwdriver
x 10
CAUTION:
ADULT ASSEMBLY REQUIRED. Hardware contains
small screws with sharp points. Keep unassembled
parts out of the reach of small children.
Heart Table and Chair Set
5
Step 1
x 2
Place Bottom through Top.
2
4
x 2
x 2
x 2
7
9
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and
frequently tighten hardware if necessary. If
maintenance is not carried out, the product could
cease to function properly.
Parts List
Assembly Instructions
NOTE: Once the two pieces of the plastic bin are connected, mechanism is permanent.
Do not attempt to separate the two pieces once assembled.
Bottom
Top
WARNING:
CHOKING HAZARD. Small parts and sharp points, not suitable
for children under 3 years.
To order replacement parts, please visit www.kidkraft.com
Bin
Step 2
Pull up Top with one hand and push down Bottom at the
same time until the two parts lock. Make sure that the
six "U" hooks have been securely locked.
*Repeat for lavender bins.
Step 3
10
Pink
x 2
Patent Pending
Item #26913A
Bottom
Top
11
Lavender
x 2
Customer Service
1-800-933-0771
www.kidkraft.com
1