Resetting Overload Protection - Eaton PRS0100001 User Manual

Eaton Compressor Rotary Screw Compressor

Resetting Overload Protection

WARNING
A.
Using lock key, remove electrical panel
from unit
C.
Once motor has cooled, press-in on BLUE
button
If motor overload protection is caused by any other reason, contact Eaton Compressor immediately!
Disconnect, tag & lock out electrical power to unit, or electrical shock
could result.
22
B.
Locate BLUE reset button on relay
attached to K1 contactor.
Example of relay on larger units.